Sleeping bag repair

TheCougar

WKR
Joined
Jun 6, 2016
Messages
3,279
Location
Virginia
I am looking for someone to repair my Stone Glacier 15 bag. My first trip using it and a large hole got melted into the foot box from a stove. The hole is about the size of an outspread hand and covers a couple of baffles. Is recovered all the down and covered the hole in gorilla tape, but it’s a very expensive bag and I’m trying to salvage it. It doesn’t need to be pretty, only functional. Send me your champions…

@pods8 (Rugged Stitching) IMG_6097.jpeg
 

Poser

WKR
Joined
Dec 27, 2013
Messages
5,562
Location
Durango CO
My repair guy is currently not accepting any gear as he landed a sewing subcontract from a manufacturer.
A hole that size in that location, I'd be tempted to replace the existing Gorilla tape with clear gorilla tape which lighter, and call it good. A panel of similar fabric, however, could be sewn in. In fact, you could just buy a panel of fabric and hand sew in place as a patch. Gonna lose the baffling there, but maybe not big enough of a surface area to matter.
 

sndmn11

"DADDY"
Joined
Mar 28, 2017
Messages
10,225
Location
Morrison, Colorado
If they can't repair, I'd just tenacious tape it and seal the edge with aqua seal. I've got a bunch of small patches done that way in our WM that are a few years old, and they seem fine. I can't imagine the nylons are drastically different.
 

S.Clancy

WKR
Joined
Jan 28, 2015
Messages
2,479
Location
Montana
If they can't repair, I'd just tenacious tape it and seal the edge with aqua seal. I've got a bunch of small patches done that way in our WM that are a few years old, and they seem fine. I can't imagine the nylons are drastically different.
If I was at home I would show you my patch job. I basically did the same thing OP did, except on the hood. I did the ol Tenacious Tape and gorilla tape repair in the field. Then, at home I did the tenacious tape and aquaseal around the edge, sumbitch has held for 5 years with no sign of giving up. I routinely take that bag (15F) to it temps rating and below and don't even think about my patch.
 
OP
TheCougar

TheCougar

WKR
Joined
Jun 6, 2016
Messages
3,279
Location
Virginia
If I was at home I would show you my patch job. I basically did the same thing OP did, except on the hood. I did the ol Tenacious Tape and gorilla tape repair in the field. Then, at home I did the tenacious tape and aquaseal around the edge, sumbitch has held for 5 years with no sign of giving up. I routinely take that bag (15F) to it temps rating and below and don't even think about my patch.
I am surprised. I wouldn’t think that would hold up to being stuffed/unstuffed and violently compressed in a compression sack.
 
OP
TheCougar

TheCougar

WKR
Joined
Jun 6, 2016
Messages
3,279
Location
Virginia
If I was at home I would show you my patch job. I basically did the same thing OP did, except on the hood. I did the ol Tenacious Tape and gorilla tape repair in the field. Then, at home I did the tenacious tape and aquaseal around the edge, sumbitch has held for 5 years with no sign of giving up. I routinely take that bag (15F) to it temps rating and below and don't even think about my patch.
Which version of aquaseal did you use?
 

S.Clancy

WKR
Joined
Jan 28, 2015
Messages
2,479
Location
Montana
Which version of aquaseal did you use?
Just normal Aquaseal, not UV.

It has a ton of nights on it since then, over 100. I slept in that bag -10F two yrs ago (layered with puffys) and the hood was fine. I'll send a pic of the patch I did when I get back from deer hunting next Weds.
 
Top