SilencerCo Scythe Ti failures

[thinhorn_AK]

They turned around the first failure really fast, 1 week and it over July

They told me "they don't recommend using hand loaded ammo with any of their suppressors." I told them there was no engineering logic to that, my hand loads are conservative and very consistent compared to plenty of factory ammo.

who the hell docent shoot hand loads??? I can't even remember the last time I fired factory ammo.

 

[Dave_S]

who the hell docent shoot hand loads??? I can't even remember the last time I fired factory ammo.

I can't imagine that I'm the only one on here who just doesn't have the time. I'd love to....just not an option right now. Someday.

 

[thinhorn_AK]

I can't imagine that I'm the only one on here who just doesn't have the time. I'd love to....just not an option right now. Someday.

I mostly meant it as a joke but I really can’t remember the last time I shot factory ammo. I have a bunch of it, I just don’t use it.

 

[Dave_S]

I mostly meant it as a joke but I really can’t remember the last time I shot factory ammo. I have a bunch of it, I just don’t use it.

I did consider that. But hey man, I’m jealous. That’s my life goal.


Sent from my iPhone using Tapatalk

 

[806guns]

I will have the new Sycthe STM next week. Plan to run it on a 26" 300 Norma mag improved. Maybe I won't after seeing this. Keep it for my 6.5 prc and lower

 

[ScienceNerd]

I will have the new Sycthe STM next week. Plan to run it on a 26" 300 Norma mag improved. Maybe I won't after seeing this. Keep it for my 6.5 prc and lower

There is a good chance that with the STM being a different material they don't have the issue.

 

[ScienceNerd]

I am thinking that I may just take the hit on weight and some sound suppression and go for a TBAC Magnus K RR with CB mount. Also considering DD Enticer Ti or AB Raptor 6 or 8.

 

[Gert22]

If you’ve experienced catastrophic failure of the Scythe Ti, please post the following:

1. Cartridge or cartridges used with approximate round count

2. Barrel length

3. Factory ammo, hand loads or both

4. Details of ammunition

5. Details of failure (to include failure point and pics)

Voted yes
22 inch barrel on a 7 PRC
Factory 180 elm
Roughly 200 round on a 22-250 and 100ish on the 7 PRC.
It was the 2nd shot of the day when it blew up.

 

[ScreamingPotato]

Are there any temperature patterns, like blowing up on a really cold day after heating up quickly?

 

[CCooper]

Just picked up my 2nd SiCo exploder can this morning. It will be going on a 18" 6 PRC which will eat a healthy diet of N570. We shall see if it lasts...

 

[waspocrew]

Just picked up my 2nd SiCo exploder can this morning. It will be going on a 18" 6 PRC which will eat a healthy diet of N570. We shall see if it lasts...

Keep us posted!

 

[waspocrew]

Has anyone really ever paid attention to the temp of their can when shooting at a reasonable pace (bolt gun)? My dad has an Ultra 7, I have a 338 Ultra - we just go and shoot. Neither of us sits and worries about the temp (the cans definitely get hot) and none have blown up.

Just makes me wonder what is going on with the Scythe-Ti… I bought mine since my Gunwerks 8ight (steel) is ~ 20 oz. I shoot a pretty high volume of 223 at prairie dogs, so may need to keep the 8ight on the 223 if it’s a temp issue.

 

[jbwright]

Voted yes
22 inch barrel on a 7 PRC
Factory 180 elm
Roughly 200 round on a 22-250 and 100ish on the 7 PRC.
It was the 2nd shot of the day when it blew up.

Blow up on the 7 PRC or the 22-250?

 

[Dave_S]

I am thinking that I may just take the hit on weight and some sound suppression and go for a TBAC Magnus K RR with CB mount. Also considering DD Enticer Ti or AB Raptor 6 or 8.

I had a scythe on order and changed it to a Magnus S. Taking the weight and length penalty to avoid what is starting to seem like inevitable failure.


Sent from my iPhone using Tapatalk

 

[Lawnboi]

When do we start crowd funding a 16” 300 rum barrel to check your welds.


My concern buying one would be that this is a relatively new product, a product that should last a lifetime.

 

[wesfromky]

When do we start crowd funding a 16” 300 rum barrel to check your welds.

OCL proofs their design/weld changes with a 12.5" 300wm

View this content on Instagram

View this content on Instagram