Sierra Heavy TMK 6MM Testing

[Jordan Smith]

Getting ready to order a 6cm barrel for my tikka.. What's the optimal twist rate for these new 116's?

I'd go 7".

 

[huntsd]

Tikka factory Roughtech 1:8” 243win cut to 16”.

116gr TMK-
View attachment 1028475



107gr TMK-
View attachment 1028476

@Formidilosus any thoughts on 4831sc for these using a 243?

 

[Formidilosus]

@Formidilosus any thoughts on 4831sc for these using a 243?

That’s next.

 

[huntsd]

That’s next.

looking forward to it

 

[5MilesBack]

That’s next.

H1000 too??? I have a bunch of H1000 and H4350.

 

[Axlrod]

@Formidilosus any thoughts on 4831sc for these using a 243?

I'm on my second 8# jug of H4831sc in 243's & 243 AI w/CCI 250's and 105 grain bullets. It gives me 80-100 fps more than H4350 and shoots better than any powder I have tried in those guns. (it's my favorite in 280AI & 416 Rigby too).
6.5 Staball will get nearly another 100 fps over 4831, but my groups were about double the size.

 

[PathFinder]

H1000 too??? I have a bunch of H1000 and H4350.

H100 is on the top end for burn rate, but works well. That's what I'm using in a 243 Improved. Probably start around 46 grains and work up. Theoretically, it should allow for much longer barrel life.

 

[5MilesBack]

H100 is on the top end for burn rate, but works well. That's what I'm using in a 243 Improved. Probably start around 46 grains and work up. Theoretically, it should allow for much longer barrel life.

That's definitely one of the considerations I'm looking at.

 

[Timjohnson11]

Sorry if someone has mentioned this but I got an email from copper creek today with a link to a survey. The survey was about whether or not the should offer the TMK line across their ammo offerings and in “all” calibers.

 

[Marbles]

Yes…but as I understood it he’s talking about a given time of year at a given low elevation with shorter distances. In every other instance, stability would increase. So if the guy wants to see if they’ll work for down in the mangroves, that can be seen easily.

It isn’t as though he’s shooting at 5000 DA all year long then taking trips to Florida and worried about it. That would be different. If that’s the case, then my apologies.

Weather and temperature.

Not even a cold day


Personally, I'm too lazy to have winter and summer loads.

 

[Nutkin13]

What is your elevation?

Usually 500-1500ft

 

[43.6N]

Usually 500-1500ft

Sorry to say, I very much doubt they will stabilize.
95TMK would be a better choice.

 

[Hurley88]

Weather and temperature.

Not even a cold day
View attachment 1028989

Personally, I'm too lazy to have winter and summer loads.

Yeah I PM’ed him, I was way off about his location & use case. I agree, finickiness with multiple loads gets in the way of shooting & training, no way I’d do that.