Did you try the 116gr in your 6XC?Maybe. I used the 116gr in a 6x45. But, I think that’s a bit low MV for most. The 107gr and 95gr are great for them.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Did you try the 116gr in your 6XC?Maybe. I used the 116gr in a 6x45. But, I think that’s a bit low MV for most. The 107gr and 95gr are great for them.
I’ll be buying a box of 116’s also. But happy to send 107’s.I would do that and send some 116s back your way when I get them to see what shoots best
I’ll be buying a box of 116’s also. But happy to send 107’s.
All 5/5 test samples spoken for. Whoever gets them should post up how they shoot if they get the chance!!
Sweet thanks i got some orderedThe 100 counts still show in stock for me.
Did you try the 116gr in your 6XC?
You typically can’t go wrong with 30.5-31 grains of varget in a dasher. Pick any charge weight in that range and get to shooting bugholes. You can probably run a little higher if you’re chasing highest velocity.Anyone have any suggestions for starting powder load for 6 dasher, alpha brass, varget and the 107 tmk?
ThisYou typically can’t go wrong with 30.5-31 grains of varget in a dasher. Pick any charge weight in that range and get to shooting bugholes. You can probably run a little higher if you’re chasing highest velocity.
Thanks!!You typically can’t go wrong with 30.5-31 grains of varget in a dasher. Pick any charge weight in that range and get to shooting bugholes. You can probably run a little higher if you’re chasing highest velocity.