Should be close to the same process as with FFP.
This has worked for me except when I mangle the wind call. If there’s a better way (excluding going with FFP), then please let me know so I can adjust.
Using StrelokPro for demonstration purposes.
Measure (or guess) the wind. Open your ballistics app and go to your rifle’s profile. Enter the wind speed. Recalculate and you should see the required wind. Go to your reticle and adjust your magnification to match your scope. See which hash mark to use; yellow dot on target. You can adjust elevation as well to make it easier to see.
First you do need windage hash marks or you are going to have to dial. True for SFP and FFP. Second, may not be 100% lined up due to fraction of MOA (as example). Should be true for FFP as well.
There may be times you may be better served going up or down a value to get better alignment (ex: if the MOA splits the hash marks). Should not be an issue as you know where the animal is located.
Keeping things simple. 10 mph @ 90*.
View attachment 340335
Example of 15x scope set to 9.5x (match scope).
View attachment 340337
Example of 15x scope set to 6x (match the scope).
View attachment 340338
I’ll do something similar for elevation if I’m in a spot for awhile. I’ll range around me and then look to see what the hash marks line up to for distance at a set magnification. This allows me to hold over and shoot if I need to take a quick shot. I know if it’s beyond then I’ll have to dial.