seekins ph3 magazine

[walkingduckwaterfowl]

What magazine are you running in your seekins ph3? The carbon mag that came with my rifle appears to feed reliably but makes contact with the underside of the bolt causing a noise (carbon vs. steel) when operating. I reported the "issue" to seekins and they sent me an Amend2 mod2 AICS magazine. The Amend2 fails to feed requiring a tap/rack between each round....I reported this to seekins and haven't heard back. My rifle is chambered in 6CM.

Anyone have suggestions for reliable feeding out of their ph3?

 

[Luvbowhuntn]

MDT 3 round
This is what I use in my PH3 6Creed. I prefer it over my carbon mag

 

[coryp]

What magazine are you running in your seekins ph3? The carbon mag that came with my rifle appears to feed reliably but makes contact with the underside of the bolt causing a noise (carbon vs. steel) when operating. I reported the "issue" to seekins and they sent me an Amend2 mod2 AICS magazine. The Amend2 fails to feed requiring a tap/rack between each round....I reported this to seekins and haven't heard back. My rifle is chambered in 6CM.

Anyone have suggestions for reliable feeding out of their ph3?

The carbon mag works ok for me as far as feeding but kinda sticky trying to get in not a huge fan of that.

 

[Luvbowhuntn]

Exactly why I made the switch Coryp

 

[walkingduckwaterfowl]

Thanks for the advice the MDT mag works great

 

[MCGHeel]

Anybody have issues with LA mags? Mine is pretty sticky and I have trouble getting 3 rounds to consistently load. I have 300wm and it’s my first belted cartridge and it seems very difficult to get the belts over one another. Also noted the follower routinely tips down at front letting cartridges tip and gets stuck in downward position. Maybe the CF mags make this worse? Any advice or anyone with same type issue?


Sent from my iPhone using Tapatalk

 

[wrxinfx808]

Anybody have issues with LA mags? Mine is pretty sticky and I have trouble getting 3 rounds to consistently load. I have 300wm and it’s my first belted cartridge and it seems very difficult to get the belts over one another. Also noted the follower routinely tips down at front letting cartridges tip and gets stuck in downward position. Maybe the CF mags make this worse? Any advice or anyone with same type issue?


Sent from my iPhone using Tapatalk

I'm having the same issues with my 7prc. First 2 feeds fine and the last gets dragged forward and dips down and then lodges against the front of the magazine.

 

[MCGHeel]

I'm having the same issues with my 7prc. First 2 feeds fine and the last gets dragged forward and dips down and then lodges against the front of the magazine.

Testing the Apex Predator 3 and 4 round mags. First range session fed fine. Will update as more shooting occurs. To be fair, they show the same tendency to nose down when being loaded as factory Seekins mag. I think this has to do with the mag spring being biased toward the rear of the mag without much spring pressure against the front of the follower. This seems to be the case with both types of mags.


Sent from my iPhone using Tapatalk