Seekins Ph2 new barrel

[mountainlake]

I’ve got a Seekins Havak Ph2 chambered in 6.5 PRC. It’s about due for a new barrel and I would like to put a proof carbon barrel on it. It has the factory stock on it and I’m curious if the proof barrel would have enough clearance to where it would not be touching the stock. Has anybody on here rebarreled a ph2 and run into any issues?

 

[JShe95]

Following. In the same spot with a PH2 in 300 PRC.

 

[mountainlake]

Following. In the same spot with a PH2 in 300 PRC.

I’d also be curious to find out from others if anybody has put a ph2 in a Rem 700 clone chassis such as an MDT hnt26. Im just not exactly sure if the ph2 is an exact 700 clone or not.

 

[AM_Hunter]

Try reaching out to seekins, they may be able to answer your questions. Their responses are usually pretty rapid.

 

[bhovda]

I put a bartlein #3 on a ph2 and had to do some fitting on the stock. Not sure how wide the carbon fiber barrel would be