Seekins Chassis now available

[hoooogan]

What’s the weight if you don’t mind

@hoooogan

 

[hoooogan]

Mini carbide bit in the Dremel did the trick. Took several passes but she fits in there nicely. From what I can tell, she's sitting all the way down. Barrel clearance for days.




Folder fits around the Waypoint bolt, perfectly.

 

[Graves14]

I picked one of these up to build up a Tikka .223 trainer in and I have been exceptionally happy with it so far. I'm taking it out on Saturday to do some field shooting but it seems like this will be a really handy little rifle.

The fit and finish was excellent on the chassis I received, installation was a breeze. This is making me even more excited to get the Element Hunter I ordered.

 

[Samson7x]

How firm is the folding mechanism? Will it easily come open while hiking?

 

[hoooogan]

How firm is the folding mechanism? Will it easily come open while hiking?

It is STIFF. It will almost hold the weight of the rifle if you grab the butt pad.

 

[Graves14]

It is definitely stiff but I don't get the people who freak out about it its a friction hinge, thats what holds it closed when folded so I don't want it loose and rattling. i have no issue folding and unfolding it quickly.

 

[6.5x284]

Mini carbide bit in the Dremel did the trick. Took several passes but she fits in there nicely. From what I can tell, she's sitting all the way down. Barrel clearance for days.

View attachment 1028252
View attachment 1028257

Folder fits around the Waypoint bolt, perfectly.

View attachment 1028261

Unfamiliar with a BSF contour. Do you know where it falls with regards to a M24/Carbon sendero?

That bottom channel looks like mlok? Is there a full length Arca available yet anywhere or guys doing small sections?

I now see your estimated measurements, thanks. Very helpful gents!!


Sent from my iPhone using Tapatalk

 

[hoooogan]

Unfamiliar with a BSF contour. Do you know where it falls with regards to a M24/Carbon sendero?

That bottom channel looks like mlok? Is there a full length Arca available yet anywhere or guys doing small sections?

I now see your estimated measurements, thanks. Very helpful gents!!


Sent from my iPhone using Tapatalk

BSF has a larger than Sendero profile. 0.930" vs 0.830". It's between a magnum and bull contour. It's also not a tapered contour. The carbon section is straight. From what i'm seeing, you could easily go larger, but that's not really the market for this chassis.

The bottom has MLok all the way down, but the rail protrudes from the forend about 0.100". I know Seekins has a mini Arca plate that's about an inch long, but i'm sure any other MLok Arca plate would work. I'm gonna printing my own arca rail that fits tighter to the chassis, so it's not floating below the forend. Right now, I just have a generic Arca plate that I printed for my Grayboe Trekker's sling studs, but you can see it's spaced out that ~0.100".

 

[6.5x284]

BSF has a larger than Sendero profile. 0.930" vs 0.830". It's between a magnum and bull contour. It's also not a tapered contour. The carbon section is straight. From what i'm seeing, you could easily go larger, but that's not really the market for this chassis.

The bottom has MLok all the way down, but the rail protrudes from the forend about 0.100". I know Seekins has a mini Arca plate that's about an inch long, but i'm sure any other MLok Arca plate would work. I'm gonna printing my own arca rail that fits tighter to the chassis, so it's not floating below the forend. Right now, I just have a generic Arca plate that I printed for my Grayboe Trekker's sling studs, but you can see it's spaced out that ~0.100".

View attachment 1028295

Awesome man, super helpful.

I've seen their small sideways ARCA plate (among others like the Annex Sidekick, etc...) and they are slick for tripods, but none of my bipods would work with a sideways ARCA.

Like the idea of printing that so it fits better. If you want to share the STL lots of guys have printers now if you're not trying to sell them!

 

[hoooogan]

Awesome man, super helpful.

I've seen their small sideways ARCA plate (among others like the Annex Sidekick, etc...) and they are slick for tripods, but none of my bipods would work with a sideways ARCA.

Like the idea of printing that so it fits better. If you want to share the STL lots of guys have printers now if you're not trying to sell them!

I'm not opposed to providing an STL file. I'll see what I come up with, but it's pretty low priority right now.