Savage 110 Ultralite Issues

Just picked up an ultralight and had an extra scope base from Burris laying around. Tried to thread in the 8-40 screws that came with it and the fit was a no go as far as I am concerned. Hoping to avoid running a tap I’ll try another base and see if the screws that come with it are better. I am thinking about the EGW base.
 
I just ran mine in there (Talley lightweight/highs). It was pretty tight but I put them in and took them out (once, and I saw some thread shavings when I came back out). My base screws were painted and that came off of the lower portion. I put some thread locker on there (came either my wheeler leveling and lapping kit) and torqued them down. All good now. If I have issues later I’ll take it to a gun shop. I put a Vortex lht 4.5-22 on there so I don’t think I’ll have a reason to change the mounts later on. 😂
 
Back
Top