Sauer 100 - Talk me out of it

[FlashbackPT]

I have the .308 standard synthetic XT. May have a gunsmith shorten the LOP, cut the barrel down to 20” and thread it to 5/8x24 (instead of the 9/16x24 from the factory). Also thinking about having the stock bedded. Has anyone tried that or seen a need to do so?

 

[Cherokeeguide]

Almost like they are just selling complete rifles..... I dont know of anybody who has sent a rifle back to the factory to have a new barrel screwed on

I sent a Ruger No.1 B back to Ruger to have a new barrel screwed on because the one originally screwed on to it was shit.

 

[craigrh13]

Anyone here pick one up in 243? How's it shoot? I'm deciding between one of these in 243 or a Ruger Gen 2 in 6 creed.

 

[Fabel.52]

Anyone here pick one up in 243? How's it shoot? I'm deciding between one of these in 243 or a Ruger Gen 2 in 6 creed.

The Sauer 243 is a 1/10 twist rate so not good for the heavy bullets if thats what you wanted to shoot. Sounds like you should hold off a bit and wait for the tikka 6 creedmoor. Or if you don't want to wait tikka 243 1/8 twist. Or get a Sauer 100 in 6.5

 

[Q_Sertorius]

Anyone here pick one up in 243? How's it shoot? I'm deciding between one of these in 243 or a Ruger Gen 2 in 6 creed.

I’d be shocked if it didn’t shoot 95 NBT or TMK really well, but I don’t have one in .243.

My 9.3x62 Sauer might be the most accurate and least picky rifle I own. It just stacks everything I feed it until I start getting punchy. I am currently having it cut and threaded.

My 6.5 CM is a bit more picky than I would like, but still puts ammo it likes into consistent 1.75” groups. Always seems to do about eight shots in a tight sub-MOA group with one or two that open up the cone. I am going to have to reload for that one.

 

[craigrh13]

The Sauer 243 is a 1/10 twist rate so not good for the heavy bullets if thats what you wanted to shoot. Sounds like you should hold off a bit and wait for the tikka 6 creedmoor. Or if you don't want to wait tikka 243 1/8 twist. Or get a Sauer 100 in 6.5

That's where I'm at right now. I'm leery of the 1:10 twist in the Sauer. I have a Sauer in 6.5cm and love it. The price is just so appealing in the Sauer. I own several Ruger Americans and love them as well. I know they don't get much love here but they are tack drivers for me.

I'm just not sure the 6 creed is needed for my intended uses here in Michigan. I figured the 243/6 cm would be great for my kid to shoot and a great wood chuck gun.

 

[1000yards]

That's where I'm at right now. I'm leery of the 1:10 twist in the Sauer. I have a Sauer in 6.5cm and love it. The price is just so appealing in the Sauer. I own several Ruger Americans and love them as well. I know they don't get much love here but they are tack drivers for me.

I'm just not sure the 6 creed is needed for my intended uses here in Michigan. I figured the 243/6 cm would be great for my kid to shoot and a great wood chuck gun.

FWIW, Sierra is conservative with their twist rate recommendations. They told me the 6.5 Sauer in 8.66 twist would probably not stabilize the 130 TMK. But I get full stability, at sea level and 30° confirmed all the way out to 460 yd.

There are guys getting stability with a 95 TMK in 10 twist barrels out west. What's your elevation?

 

[craigrh13]

FWIW, Sierra is conservative with their twist rate recommendations. They told me the 6.5 Sauer in 8.66 twist would probably not stabilize the 130 TMK. But I get full stability, at sea level and 30° confirmed all the way out to 460 yd.

There are guys getting stability with a 95 TMK in 10 twist barrels out west. What's your elevation?

Right around 900-1000'

 

[1000yards]

Right around 900-1000'

Not at all telling you what to do, but if it were me wanting a 6, I would go for it. If the 95 tmk doesn't stabilize, the 95 nbt definitely will.

 

[craigrh13]

Not at all telling you what to do, but if it were me wanting a 6, I would go for it. If the 95 tmk doesn't stabilize, the 95 nbt definitely will.

I think I am just going to get a 6cm in a Ruger Gen 2. I have several in other calibers and all shoot very well. No they aren't the most refined but they do get better with time, mcarbo spring helps a lot on the trigger and I have a MDT stock on my 400 legend I could throw on the 6cm. The 6cm seems like a wicked and fun little round. Thank you.