Sauer 100 - Talk me out of it

[nm.otter]

...and (in the event it turns into that mythical tack-driver gun you just can't let go of) you can always have the barrel and action nitrided once you start spending money on stocks and the like.

 

[IW17]

I would do, and did: two-piece Burris XTR pic rails Loctite 380 bonded on, with good pic rings. The Leupold Backcountry one piece rings are solid, but you can’t vary ring spacing on them.

Edit, answered my own question.

 

[IW17]

One more thing, with a trijicon ascent 3-12x40, what height scope rings?

 

[nnmarcher]

I’d also be interested in what ring heights people suggest. The SWFA BF sale comes with a free set on a few of the scopes


Sent from my iPhone using Tapatalk

 

[IW17]

So far the only thing Ive been able to confirm is the talley one piece base/ring combo med set works with a 1" tube up to a 42mm objective. Not sure if that would translate across the board with a two piece set.

Plus just because something works doesn't mean it's ideal. I don't want to buy something and it's not lining up right with the cheek weld that this stock offers.

 

[Igloo]

Caved and ordered a 6.5x55 blued synthetic (Canada here). Need? Def not, but life is short and guns are cool.

Not gettin the smoking deals you guys are but for what comes up to $700 USD I still think its a lot of rifle. Things cost more than they used to and guns cost more up here. Way she goes.

You guys know how to sell rifles! Kiddin...kinda. Already had an eye on them as they seem like a great platform.

 

[crazygrizz]

So far the only thing Ive been able to confirm is the talley one piece base/ring combo med set works with a 1" tube up to a 42mm objective. Not sure if that would translate across the board with a two piece set.

Plus just because something works doesn't mean it's ideal. I don't want to buy something and it's not lining up right with the cheek weld that this stock offers.

Really glad to read this as I bought those exact talley rings to try.

Anybody here upgrade the stock, recoil pad, or anything else? I haven't got to shoot mine yet

 

[peaceful_ruler]

Really glad to read this as I bought those exact talley rings to try.

Anybody here upgrade the stock, recoil pad, or anything else? I haven't got to shoot mine yet

My solution for the extended LOP and poor recoil pad on mine…

1) remove an inch of existing stock/butt pad with my portable bandsaw
2) fill the hollow stock with expanding foam
3) install a slip on neoprene gel filled recoil pad, medium size fits great
4) install a leather cheek riser/ammo holder on the stock to both raise the comb slightly and improve aesthetics

 

[PurpleDragon]

Late to this thread, but I bought a Sauer 100xt in 2023. .308 with a meopta meosport 3-15x50.

1st and 3rd images are 3 shot groups at 100yds with Sellier and Bellot 165gr exergy ammo.
Center group is Hornady 150gr Superformance CX.

Tack driver may be an understatement

 

[Castle Rock]

They are great scopes

 

[longrangelead]

I bought a 243 just to mess with and probably rebarrel to a fast twist 6 or 25 Creed.

run down:
21.5" 1:10 twist barrel
.685" muzzle
mag inside length 2.880"
7lb 1 Oz w/mag, no scope
8lb 14oz w/rail & SWFA 3-15 G1
Scope base screws are Rem 700 Long action spacing

I tested 6 factory ammo in 5 shot groups for a basic accuracy test. I'm going to chop & thread the barrel and repeat these tests with a suppressor later.


Norma was the best with 5 inside 1"
100JSP 2953 advertised 2798 actual avg(5) ES 85


2960 Adv 2720 avg ES 52


sorry for the overlap on this one...
2960 adv 2770 avg Es 52


3150 adv 2947 avg Es60


3330 adv 3164 avg Es 65


3425 adv 3167 avg Es 47

-Hand Loads-

First, I checked OAL to lands on some popular bullets.

95TMK 2.875"
95NBT 2.733"
112MB 2.920"
108ELDM 2.840"
103ELDX 2.840"
87V-MAX 2.710"
105BTHP 2.795"
85TSXBT 2.740"


95TMK 2.80" oal
40.0 H4350
2907 avg
Es 42


87 V-Max 2.70 oal
35.0 H4895
2905 avg
Es 56


again, sorry for the overlap
95 NBT 2.70" oal
43.5 H4831SC
2864 avg
Es 34

I'll try the 103/105 and add to this.

Then I'll chop/thread to 18" and repeat.

I'll do a follow up post like this with the 18" info.