Sako 20 hunter experinces

[pass shot]

Looking for a new rifle. I made the mistake of putting my hands a Blazer with the stock similar to the Sako S20 hunter and loved it but Blazer is way out of my $. I know sako and tika get great review but swore I'd never buy another after the way they handled an issue with a Sako Brown bear i owned for a minute once. The gun would eject the spent rounds in the optic and right back into the mag causing jambs. After looking into this online its apparently a common isissue and Berretta said pack sand the gun works. I'm looking at the S20 in 300 wm. Anyone have any real word experience with this actually gun? Is this problem they have resolved?

Thx

 

[Brontosaurus]

@fwafwow does

 

[pass shot]

@fwafwow does

Meaning its has the problem? Its strange the following these guns have but this problem seems consistent on all of them

 

[Brontosaurus]

Meaning its has the problem? Its strange the following these guns have but this problem seems consistent on all of them

My bad. I saying he just got one so his experience might answer your question

New Sako S20 Hunter in 6.5CM + Precision stock - what now?

Today I ended up pulling the trigger on the above. I'm still in love with my relatively new RSS, and that rifle is influencing what I might do with this new rifle. Cut the barrel? I'm going to suppress this. I initially wanted to cut it close to 16", but since it's already threaded, I would...

rokslide.com

 

[ResearchinStuff]

the ejection angle on the sako 85 is because of the fixed ejector, the S20 has a plunger style ejector and should eject just fine. @Ryan Avery has an S20 too. it shoots very well.

Sako S20 First 6 shots

To simple Hornady 140 ELD-M factory ammo. One bore sight shot, adjusted, 5 shots inside a 1” dot. Sent from my iPhone using Tapatalk Pro

rokslide.com

 

[pass shot]

Thanks guys. This ones on the short list

 

[fwafwow]

I haven’t shot mine yet. But I would think @Ryan Avery would have mentioned if this is a problem.

 

[pass shot]

I haven’t shot mine yet. But I would think @Ryan Avery would have mentioned if this is a problem.

I would agree. Just learning this site and the link sharing. Read up on his post. May be ordering one soon

 

[Hnthrdr]

This place is expensive…. Pulled the trigger on a 6.5 Prc in the hunter stock… too dang good not to. Plus I’m interested in the prc for doing some longer range stuff, have a handful of cm and .308.
I believe it was asked earlier but any clue on aftermarket support? Won’t do anything to it initially, but some day it might get the cf barrel and stock treatment to lighten it up a bit.

 

[pass shot]

This place is expensive…. Pulled the trigger on a 6.5 Prc in the hunter stock… too dang good not to. Plus I’m interested in the prc for doing some longer range stuff, have a handful of cm and .308.
I believe it was asked earlier but any clue on aftermarket support? Won’t do anything to it initially, but some day it might get the cf barrel and stock treatment to lighten it up a bit.

I don't much about customer support other the crap that Berretta gave with the Sako 85 I had. American Rifleman had a great review on a 300 wm

 

[HingleMcCringleberry]

My buddy has an S20 precision with a trijicon tenmile. Great setup and zero ejection issues.

 

[Scopes]

I have one in 6.5 CM, 800 something rounds fired. I've had zero ejection problems.

 

[General RE LEE]

The Sako S20 with Precision stock and Tikka UPR are excellent rifles for hunting and ringing steel. Lightweight but adjustable cheek pieces and vertical grips with Sako TRG palm swells.

 

[Scopes]

Agreed, ergos are very similar. I really like the extra adjustability of the S20 stock and trigger though.

 

[UncleFester]

In my opinion the s20's are very underrated guns. I have two with zero issues so far and both are extremely accurate. I'll probably wind up with a couple more before its said and done.

 

[fwafwow]

In my opinion the s20's are very underrated guns. I have two with zero issues so far and both are extremely accurate. I'll probably wind up with a couple more before its said and done.

They are still available at great prices. If they made one in 223 I would buy another one today.

 

[UncleFester]

They are still available at great prices. If they made one in 223 I would buy another one today.

I'm looking at the .308 and or the .243

 

[pass shot]

Im holding out until I can put my hands on one but they are definitely on the short list

 

[jahaze]

I have one in .270 and love it. Have killed several deer and an elk with it. Fits me well and is a pleasure to shoot.


Sent from my iPhone using Tapatalk

 

[pass shot]

How do they carry? Coming from standard rifles and shotguns with a could straight grips in the mix