RokStok

[9487329]

So glad I changed the contour to Ace 3 from the factory sporter that I originally ordered. Exactly the gap I wanted.





Squeezing the barrel down hard, doesn't touch

 

[BradArnett]

They must have beefed the current Rokstok up. Mine is the original pre order. 36 oz with altitude bottom metal, action screws, leather cheek, wooden 1.5” spacer, lug, pic/Spartan rail.

This is one of mine from the very first pre-order. Its 3b contoured r700 sa. I'd say its on the lighter side for sure. My rokstok lite on order will probably be heavier

 

[Antares]

Painted on of my Rokstoks flat black while I was rebarreling with a new PBB 16.5” 6CM. Reassembled now and looking forward to seeing how it shoots this weekend.

 

[Gadjet]

Painted on of my Rokstoks flat black while I was rebarreling with a new PBB 16.5” 6CM. Reassembled now and looking forward to seeing how it shoots this weekend.

View attachment 1050090

That looks great!

 

[Lane Avery]

Some Rokstoks on the way to their new families.

Sent from my SM-S928U using Tapatalk

 

[waspocrew]

Some Rokstoks on the way to their new families.

Sent from my SM-S928U using Tapatalk

Sure hope mine is in that pile somewhere!

 

[Antares]

Balance felt great. I’m pumped to have my hunting rifle back together in April instead of later in the summer.

 

[Mtslackcountry]

Painted on of my Rokstoks flat black while I was rebarreling with a new PBB 16.5” 6CM. Reassembled now and looking forward to seeing how it shoots this weekend.

View attachment 1050293

Nice clean look. What height rings are you running?

 

[Antares]

Nice clean look. What height rings are you running?

I believe those are low Hawkins Ultra Light Tactical rings.

 

[Lane Avery]

More on the way...

Sent from my SM-S928U using Tapatalk

 

[bpitcher]

Forgot to update...

Got my stock back from UM last week. Issues fixed and it looks great.

Thank you @Lane Avery and team for the speedy turnaround.

 

[sw41_nj]

Rokstok just arrived. Got it with Tikka CTR inlet and Sendero barrel profile. Trinity front and 4" ARCA segment and had it painted in Finnish m05 camo. Installed a stainless Tikka CTR 20" Bottom metal fit was tight and recoil lug in the stock fit perfectly into the action. Haven't shot it yet but everything seems perfect so far.

 

[Formidilosus]

Rokstok just arrived. Got it with Tikka CTR inlet and Sendero barrel profile. Trinity front and 4" ARCA segment and had it painted in Finnish m05 camo. Installed a stainless Tikka CTR 20" Bottom metal fit was tight and recoil lug in the stock fit perfectly into the action. Haven't shot it yet but everything seems perfect so far.

View attachment 1053774

The light green is too bright for true M05- but…. That looks great. M05 is a great camo.

 

[pdhawley]

I may need to get one

 

[grfox92]

Rokstok just arrived. Got it with Tikka CTR inlet and Sendero barrel profile. Trinity front and 4" ARCA segment and had it painted in Finnish m05 camo. Installed a stainless Tikka CTR 20" Bottom metal fit was tight and recoil lug in the stock fit perfectly into the action. Haven't shot it yet but everything seems perfect so far.

View attachment 1053774

Im loving that pain job.

Sent from my SM-S931U using Tapatalk

 

[sw41_nj]

The light green is too bright for true M05- but…. That looks great. M05 is a great camo.

UM did a very nice job. I thought about asking for ROK Granite B but I figured digital camos would be too tough to hand cerakote and I really like all the M05 variants. I'm impressed with the stock. It;'s such a great example of form following function.

 

[Treelineasassin]

Rokstok just arrived. Got it with Tikka CTR inlet and Sendero barrel profile. Trinity front and 4" ARCA segment and had it painted in Finnish m05 camo. Installed a stainless Tikka CTR 20" Bottom metal fit was tight and recoil lug in the stock fit perfectly into the action. Haven't shot it yet but everything seems perfect so far.

View attachment 1053774

Just unpacked my stock. I had to apply a lot of force to get my ctr dbm in place. Once assembled, I have to shove the mags up in with force to acquire latch. Requires physically pulling mag free from the ctr dbm. The bottom metal inlet on mine, is def too tight. Makes me wonder if it was test fit prior to shipping. These issues should been noticed very easily. None these issues apparent in the oem ctr stock. This is a 223 ctr, I dont think that's make any difference.

Anyways, emails sent to UM, will likely be riding brown truck back to Idaho once return label is in hand. A few days short of 5 months from order date, to delivery........

 

[Dobermann]

It;'s such a great example of form following function.

Yes, he did.

 

[Lane Avery]

Just unpacked my stock. I had to apply a lot of force to get my ctr dbm in place. Once assembled, I have to shove the mags up in with force to acquire latch. Requires physically pulling mag free from the ctr dbm. The bottom metal inlet on mine, is def too tight. Makes me wonder if it was test fit prior to shipping. These issues should been noticed very easily. None these issues apparent in the oem ctr stock. This is a 223 ctr, I dont think that's make any difference.

Anyways, emails sent to UM, will likely be riding brown truck back to Idaho once return label is in hand. A few days short of 5 months from order date, to delivery........

CTR DBMs will always be tighter-fitting than regular Tikka bottom metals in a Rokstok. We have to mill out areas of the inlet for proper fitment. Each manufacturer of CTR components will have slightly different external mag dimensions, so there will be some variance. We do test fit DBMS and actions on each Rokstok before shipping. If you send us the bottom metal and mag, we will cut it to the exact specification of your magazine.

 

[Lane Avery]

Rokstok just arrived. Got it with Tikka CTR inlet and Sendero barrel profile. Trinity front and 4" ARCA segment and had it painted in Finnish m05 camo. Installed a stainless Tikka CTR 20" Bottom metal fit was tight and recoil lug in the stock fit perfectly into the action. Haven't shot it yet but everything seems perfect so far.

View attachment 1053774

It is a great looking rifle indeed. Good decision with the pattern and colors.