RokStok

[HuntHarder]

I can only imagine Jake is very irritated with receiving stocks that are already late and then they are out of spec. That sucks.

 

[Willie IV]

If UM owns the mold I wonder how long before they bring this in-house. Seems like something I'd consider if I were them. They don't seem afraid of any project!

Sent from my SM-S901U using Tapatalk

 

[ezwy]

Where are they re-selling these out-of-spec stocks? I bet there's some non-weight-weenies who would snatch them up at 20% off.

Do you know what my rokstock weighed when I got it? Me neither, cuz I got a scope mounted and started shooting it! I understand people want accurate information but the whole worlds is becoming a customer service desk for the pickiest 5% of people. If they started with a weight range on the website we would have saved pages....

 

[deerhunter628]

Where are they re-selling these out-of-spec stocks? I bet there's some non-weight-weenies who would snatch them up at 20% off.

Do you know what my rokstock weighed when I got it? Me neither, cuz I got a scope mounted and started shooting it! I understand people want accurate information but the whole worlds is becoming a customer service desk for the pickiest 5% of people. If they started with a weight range on the website we would have saved pages....

is it the weight that is out of spec?

 

[JohnsIsl]

If UM owns the mold I wonder how long before they bring this in-house. Seems like something I'd consider if I were them. They don't seem afraid of any project!

Sent from my SM-S901U using Tapatalk

Or find a different partner. The Stockys price point is compelling but I suspect some would pay a little more to get a potentially more refined product on a more reliable timeframe. I mean… we got people paying $1500 for chassis.

 

[Formidilosus]

So I spoke with UM and unfortunately, my stock failed QC again and is going back to Stockys. This is no fault of UMs. I’m frustrated a subpar product is being shipped out by Stockys only to be denied at UM. The wasted time back and forth is getting old. At this point, I might see my Rokstok lite before this one is even done - that’s assuming Stockys can make the lite stock correctly.

I found it yesterday. To be clear it could be fixed, however it should not be sold to costumers.

If you want, I will take one of mine over to UM and have them paint it, etc to what you ordered.

 

[Formidilosus]

Or find a different partner. The Stockys price point is compelling but I suspect some would pay a little more to get a potentially more refined product on a more reliable timeframe. I mean… we got people paying $1500 for chassis.

It is not “find a different partner”. ALL of the viable companies were talked to before Stockys. All were the same issues:

1). Massive mold/startup costs (like $50,000)

2). $1,000 plus a stock

3). It was clear that several had a history of “copying” others stocks and then stopping production of the other companies stock.

 

[waspocrew]

is it the weight that is out of spec?

My issue is the carbon fiber is delaminating. I couldn’t care less about the weight.

 

[9487329]

With the lead time I was getting to with my rokstok going past 6 months, I was tempted to ask for a discount on a future purchase…. Then I remembered the absurd price of the S2H scope and the group buy discount for OG6-S and I realized they’re already giving it to me

I’m just excited to get it installed and to start shooting.

Their communication has been great, they’re always upfront and take care of issues, and they respond and innovate in a way no other company is. Can’t complain.

 

[RWT]

I’ll say this. I had a RS that didn’t shoot well. 2-3” groups. I thought the bolt release pin was not accounted for in the mold. I made an effort to fix myself and the rifle still shot poorly. Form asks me to send it in. I did, called the shop about a week after I know it arrived. They advised the action “wallowed” in the stock. I received a replacement within another week. I am very pleased with the customer service and decisions to replace mine. Great service with good communication. I immediately purchased the UM rings to try them out.

I will publicly recommend UM and the RS as both deliver as promised.

 

[d-bone20917]

So is UM contacting customers if their stocks need to be sent back to Stocky's for QC issues or do you need to call to find out?

 

[waspocrew]

I found it yesterday. To be clear it could be fixed, however it should not be sold to costumers.

If you want, I will take one of mine over to UM and have them paint it, etc to what you ordered.

Form, thank you for catching that and for the generous offer. Let me think on it a bit - was planning on bare carbon fiber. More than likely, I’ll just wait it out. I’m definitely appreciative of you and UM for not sending it out in the current state though.

 

[JohnsIsl]

It is not “find a different partner”. ALL of the viable companies were talked to before Stockys. All were the same issues:

1). Massive mold/startup costs (like $50,000)

2). $1,000 plus a stock

3). It was clear that several had a history of “copying” others stocks and then stopping production of the other companies stock.

That’s a bummer… Hopefully Stockys can refine the process. I will say that every time I’ve called UM they have been awesome.

 

[Formidilosus]

Form, thank you for catching that and for the generous offer. Let me think on it a bit - was planning on bare carbon fiber. More than likely, I’ll just wait it out. I’m definitely appreciative of you and UM for not sending it out in the current state though.

I’m happy to send you one of mine to use until yours is ready too.

 

[lak2004]

I’m happy to send you one of mine to use until yours is ready too.

And this right here is why this site is awesome!

 

[flyfisher117]

I am pleased with my beefy RS Lite. If anyone wants to offload a Beefy REM 700 RS hit a guy up.

I thought I read or saw or heard that the normal RS will reverentially get the same textured patterns as the lite. Is that still true?

 

[PaulIV]

So I spoke with UM and unfortunately, my stock failed QC again (delaminating) and is going back to Stockys. This is no fault of UMs. I’m frustrated a subpar product is being shipped out by Stockys only to be denied at UM. The wasted time back and forth is getting old. At this point, I might see my Rokstok lite before this one is even done - that’s assuming Stockys can make the lite stock correctly.

Apparently I’m in the same situation according to Mikey mine was also one of the impacted stocks that delaminated and has been sent back again. I’m not having the best luck with this one. I wish I could at least get the other 3 items from the order that are being held up due to the single shipping charge.

 

[bpitcher]

Forgot to update on mine.

Got a hold of UM last week and they sent me an RMA to get my LOP kit fixed. Also received an email from Cody making sure I was taken care of. Very much appreciated.

 

[flyfisher117]

Apparently I’m in the same situation according to Mikey mine was also one of the impacted stocks that delaminated and has been sent back again. I’m not having the best luck with this one. I wish I could at least get the other 3 items from the order that are being held up due to the single shipping charge.

Did you ask them to ship your other items?