RokStok

[Kaleb]

I got my email and it was in the regular email not junk.

 

[Speaks]

I have never had trouble receiving the email, and I am glad they do them. I switched to drop shadow blaze on my last order after seeing a few of them.

 

[SurfnTacos12]

Does anyone have a measurement from the end of their stock to the tip of their barrel on a T3x? (Please include barrel length)

I am looking to get a 16" 6.5CM or 6cm (maybe even ARC) and the OG6.5 ... but wondering if there is enough barrel on a 16" for the 4" OTB portion of the OG6.5 to fit without contacting the rokstok fore end.

 

[mxgsfmdpx]

Does anyone have a measurement from the end of their stock to the tip of their barrel on a T3x? (Please include barrel length)

I am looking to get a 16" 6.5CM or 6cm (maybe even ARC) and the OG6.5 ... but wondering if there is enough barrel on a 16" for the 4" OTB portion of the OG6.5 to fit without contacting the rokstok fore end.

There is room for the OG with 16” barreled tikkas in Rokstoks.

Photo of a 16” barrel and OG in Rokstok from @Formidilosus



And a measurement from @david2duck

 

[SurfnTacos12]

There is room for the OG with 16” barreled tikkas in Rokstoks.

Photo of a 16” barrel and OG in Rokstok from @Formidilosus

View attachment 935461

And a measurement from @david2duck

View attachment 935462

Fantastic! Thank you, exactly what I was hoping for!

 

[TheUgly]

Finally got my 2nd Rokstok this past week and put it on a 16.5” 22CM. Had this one inlet for a CTR bottom metal. Tried some TRG mags and the fitment was extremely tight so installed some shims from High Desert.

Also painted over the Black Carbon camo since it wasn’t doing anything for me.

Shootability is great. Definitely enjoy shooting the Rokstoks

 

[Wiscgunner]

Finally got my 2nd Rokstok this past week and put it on a 16.5” 22CM. Had this one inlet for a CTR bottom metal. Tried some TRG mags and the fitment was extremely tight so installed some shims from High Desert.

Also painted over the Black Carbon camo since it wasn’t doing anything for me.

Shootability is great. Definitely enjoy shooting the Rokstoks

View attachment 935942

Wish we could order the black carbon camo...

 

[Antares]

 

[HNTR918]

@Ryan Avery
Any luck on getting the Rokstock inlet for Kimber 84M & 84L actions?

 

[ljalberta]

There is room for the OG with 16” barreled tikkas in Rokstoks.

Photo of a 16” barrel and OG in Rokstok from @Formidilosus

View attachment 935461

And a measurement from @david2duck

View attachment 935462

It should be a bannable offence to post pictures of that stock. Too much PTSD for some.... But thanks for posting that, I think it's convinced me to get a 16" barrel on my next Tikka.

 

[IrkedCitizen]

Just got my confirmation email. I ordered the last stock available for the July drop on August 7th. See how long cerakote and shipping takes. Unless something goes wrong it should be well under the timeframe they quoted!

 

[BCsteve]

Just got my confirmation email. I ordered the last stock available for the July drop on August 7th. See how long cerakote and shipping takes. Unless something goes wrong it should be well under the timeframe they quoted!

I go the email confirming the specs on September 2nd and got the email today that it has been shipped.

 

[mxgsfmdpx]

It should be a bannable offence to post pictures of that stock. Too much PTSD for some.... But thanks for posting that, I think it's convinced me to get a 16" barrel on my next Tikka.

16” barrels are the way if running cans.

 

[Alex Genereux]

16” barrels are the way if running cans.

Even if you aren’t running a can most modern cartridges shooting higher bc fragmenting bullets don’t really need more than a 16-18” barrel for most people shooting them.

 

[SteveAndTheCrigBoys]

Got my second stock in. Looks like they confused my cerakote change and did sponge #7 on the second stock instead of #6 (orange one). But I really like the #7 grey too, I was 50/50 on which one to change.

Now back to wrapping that salmon rod.

 

[Telford29]

Picked up my 2nd Rokstok today at UM. This is my 223 trainer. 18 inch, cheap but effective AB A10 can. #5 sponge. Really happy with fit and finish.

 

[benconfused]

16” barrels are the way if running cans.

Bet its good balance suppressed with a 16.

 

[Q_Sertorius]

Even if you aren’t running a can most modern cartridges shooting higher bc fragmenting bullets don’t really need more than a 16-18” barrel for most people shooting them.

The muzzle blast is horrible on most 16” barrels without a can. Before I suppressed my AR, it was a literal headache to shoot.

 

[ljalberta]

The muzzle blast is horrible on most 16” barrels without a can. Before I suppressed my AR, it was a literal headache to shoot.

For us Canadians, unfortunately cans are no-dice. I'm always wearing earpro when shooting

 

[ztc92]

The first of the two Rokstoks I ordered on 5/19 arrived today. To their credit, UM emailed me to confirm specs on 8/20, but I didn’t see it and there was a delay until they called me to check. Still arrived in about 120 days so I’m content.

Didn’t get any updates or shipping info from UM after I confirmed the specs a few weeks ago. The stock just arrived without warning, which I think is the norm. I don’t have fedex alerts set up but I know that would have helped.

Stock looks great to me. Just plain OD Green sponge to keep it simple. It will be a 16.5” 243, which I should get back from the smith next week.

Overall fit and finish is very good. Only defect I see is the mating of the spacers to the stock is not flush and a small amount of epoxy is visible. That said, it won’t affect function or cause any issues and I doubt I could do any better. I’m perfectly happy with the stock.

The recessed trinity rail looks great and is so clean for all the function it offers. Not sure how much I’ll use it but nice to have options.

Hopefully my second Rokstok will arrive soon, I’m surprised they didn’t ship together but I’m sure UM has their reasons.