RokStok

[Billy Goat]

You wanting a railed one?

I ordered a tikka with no rail to put a full length ARCA on so might be letting one of my railed ones go. You'd have to forfeit the ability to go all queer eye for the straight guy on the initial cerakote choice though..

I finally got mine in.


I'm not worried about another, but after getting spammed in my email about them, that's what came to mind.

 

[flyfisher117]

Anyone have any photos of a hotdog in a hallway? Specifically a factory t3x lite in a sendero?

 

[The Harbor Master]

Here is a superlite in a CTR stock.
View attachment 910163View attachment 910164View attachment 910163View attachment 910164

That's how I would picture "dead cat" status

 

[silasbowhunter]

Well I have one ordered for my Tikka 223…
Maybe I should just order another one??


Sent from my iPhone using Tapatalk

 

[cal30_sniper]

What’s the rear sight on this bad boy? Very cool setup.

That's an Anschutz biathlon sight. I designed and machined an 11mm dovetail to mount in on the Tikka receiver as well as a clamp on front sight base for a precision muzzleloader globe. Details in the thread here: Tikka Iron Sights Project

 

[BradArnett]

Anyone have any photos of a hotdog in a hallway? Specifically a factory t3x lite in a sendero?

Ya, I have exactly that. I work out of town and will be home Friday morning and can grab some pics.

 

[khuber84]

@Unknown Munitions, why do you no longer offer a model 70 sa? All the Marshall rifles using all that inventory?

 

[mxgsfmdpx]

Anyone have any photos of a hotdog in a hallway? Specifically a factory t3x lite in a sendero?

 

[flyfisher117]

View attachment 910318

View attachment 910319

View attachment 910320

Perfect thank you!

 

[The Guide]

View attachment 910318

View attachment 910319

View attachment 910320

That's perfect for me. I started buying B&C M40 stocks for all my Howa Mini Actions just because limp stocks that touch the barrel suck and I don't have a mill to hog out stocks with a ball nose cutter. A nice stiff stock with lots of room is what I want. It's pretty easy to make most guns shoot well in a good stock.

Jay

 

[KJ_ND]

What is the recommended barrel channel for roughtech tikkas?
Edit: Factory 5/8-24 fluted factory Tikka barrel

 

[Formidilosus]

What is the recommended barrel channel for roughtech tikkas?
Edit: Factory 5/8-24 fluted factory Tikka barrel

Sendero.

 

[wind gypsy]

Anyone have any photos of a hotdog in a hallway? Specifically a factory t3x lite in a sendero?

Left is ACE tikka lite contour, right is benchmark #4. Sendero inlets.

 

[Greenringer]

What is the recommended barrel channel for a factory 223 sporter? It’s the new 20” threaded barrel. Sporter or sendero? Thanks.

 

[flyfisher117]

What is the recommended barrel channel for a factory 223 sporter? It’s the new 20” threaded barrel. Sporter or sendero? Thanks.

Seeing the above pics I would go Ace or Sendero. Unless you’re positive that you will be happy with the factory sporter barrel forever. In my research i came across a few posts where the sporter had to be opened up a little to relieve barrel contact issues.

 

[Grizzle]

Seeing the above pics I would go Ace or Sendero. Unless you’re positive that you will be happy with the factory sporter barrel forever. In my research i came across a few posts where the sporter had to be opened up a little to relieve barrel contact issues.

I've got a sendero and tikka sporter contour and I think the 3b would be the sweet spot with a factory profile barrel. The sendero is fine but you can almost fit two dead cats which is at least half a dead cat more than necessary. The tikka sporter contour does not contact anywhere but is less clearance than I like. When I get a chance I will open it up to at least one dead cat but wish I'd just gone 3b to save myself the hassle.

 

[Nine Banger]

I had a factory barrel on 3b inlet. It's good. Barrel is shot out and is not a PBB hybrid lite. I have a .750 taperless in another 3B, still lots of room.

I would not order the smaller sporter inlet.

The sendero is "extra".

 

[Greenringer]

Appreciate the advice. Went with the sendero, now the wait begins…

 

[IrkedCitizen]

Picking cerakote is the toughest part

 

[Ajsomp]

Still getting moved in to the new house but I finally dropped my 22 creed barreled action in my rokstok. I plan to mount the rings, optic, and suppressors soon.

Really holding out for the rokstok lite - but this will do until then