RokStok

[flyfisher117]

Can a section of pic rail be installed on the non railed stocks?

 

[Ryan Avery]

Can a section of pic rail be installed on the non railed stocks?

Yes

 

[Bluumoon]

Safe bet is January

Y’all should do one mold w a longer LOP than reg Rokstok, not sure how big a pita that would be.

 

[Axlrod]

Y’all should do one mold w a longer LOP than reg Rokstok, not sure how big a pita that would be.

Or offer different thickness recoil pads. I put 1" Backfire pads on both of my Rokstoks and they are perfect.

 

[benconfused]

Or offer different thickness recoil pads. I put 1" Backfire pads on both of my Rokstoks and they are perfect.

Is that backfire making a noticable difference, or you mainly using it for lop?

I've read a couple reviews on RS about it compared to a limbsaver and the performance improvement seems negligible.

 

[Axlrod]

Is that backfire making a noticable difference, or you mainly using it for lop?

I've read a couple reviews on RS about it compared to a limbsaver and the performance improvement seems negligible.

I got it for the LOP. It seems like it works as well as any 1" pad out there, but I have them on a 223 and a 6-7PRC, so no heavy recoil. It probably works a little better than the one that comes on the Rokstok just because it's thicker.
Both of my Backfires needed the holes opened up a bit so they would fit right.

 

[Bluumoon]

Or offer different thickness recoil pads. I put 1" Backfire pads on both of my Rokstoks and they are perfect.

Good idea. Don’t care how I get there.

 

[Nine Banger]

Good idea. Don’t care how I get there.

This may help someone.

I went thru this.

My goal was to add 1/2" LOP to get recoil pins in my action and move my rings back with the Maven RS1.2 that has to be jammed up into the front ring due to tube length to get eye relief.

This one fits the existing holes with caveat that the top of it is a fingernail width down from the carbon. I can live with it. The sides and bottom still have to be "ground":

Limbsaver Grind to Fit Recoil Pad Medium

The SVL Limbsaver pad uses the same recoil-absorbing technology as the pre-fit pads, but can be ground down to fit your stock for a perfect fit. Made...

www.midwayusa.com

This one will only work if you fill the screw holes and install new holes, or what I was going to do if the Limbsaver didn't work out which is install t nuts and use 4mm allen bolts. That's too much work with the limbsaver being close enough.

Pachmayr 752B Old English Grind to Fit Recoil Pad 1 Thick Medium Black

These pads have a unique rounded edge design, a "leather-look" face with black base and a skeletonized internal bottom core design. For...

www.midwayusa.com

 

[Nine Banger]

Pics of Limbsaver.

Its close enough I'll be "getting around" to grinding for a while probably.

 

[benconfused]

This may help someone.

I went thru this.

My goal was to add 1/2" LOP to get recoil pins in my action and move my rings back with the Maven RS1.2 that has to be jammed up into the front ring due to tube length to get eye relief.

This one fits the existing holes with caveat that the top of it is a fingernail width down from the carbon. I can live with it. The sides and bottom still have to be "ground":

Limbsaver Grind to Fit Recoil Pad Medium

The SVL Limbsaver pad uses the same recoil-absorbing technology as the pre-fit pads, but can be ground down to fit your stock for a perfect fit. Made...

www.midwayusa.com

This one will only work if you fill the screw holes and install new holes, or what I was going to do if the Limbsaver didn't work out which is install t nuts and use 4mm allen bolts. That's too much work with the limbsaver being close enough.

Pachmayr 752B Old English Grind to Fit Recoil Pad 1 Thick Medium Black

These pads have a unique rounded edge design, a "leather-look" face with black base and a skeletonized internal bottom core design. For...

www.midwayusa.com

What do you recommend for grounding?

 

[Nine Banger]

What do you recommend for grounding?

I think they want you to use a bench grinder but I have a belt sander with different grit belts set up 24/7 we use for all sorts of improvements.

Theres a good how to video on YouTube from kick eeze.

 

[Unknown Munitions]

Hey Roksliders, I just added 100 Rokstoks to the website. NO RAILED TIKKAS for this run, we are still filling those orders from the last run. Stockys has nearly all 100 of these stocks on the shelf and ready for inletting so they will be fast fill times. Thank you for your support!

The Rokstok - Unknown Munitions

DO NOT ORDER RAILED TIKKA, THAT OPTION IS NOT AVAILABLE FOR THIS DROP. Main Features: The Rokstok, simply the best shooting stock on the market. 100% Carbon Fiber shell and proprietary ultralight fill throughout the entire stock, no hollow areas. True Negative comb is 1/2″ above bore centerline...

www.unknownmunitions.com

@Ryan Avery @Formidilosus @Stockys @Salmon River Solutions @Shoot2Hunt

 

[khuber84]

Hey Roksliders, I just added 100 Rokstoks to the website. NO RAILED TIKKAS for this run, we are still filling those orders from the last run. Stockys has nearly all 100 of these stocks on the shelf and ready for inletting so they will be fast fill times. Thank you for your support!

The Rokstok - Unknown Munitions

DO NOT ORDER RAILED TIKKA, THAT OPTION IS NOT AVAILABLE FOR THIS DROP. Main Features: The Rokstok, simply the best shooting stock on the market. 100% Carbon Fiber shell and proprietary ultralight fill throughout the entire stock, no hollow areas. True Negative comb is 1/2″ above bore centerline...

www.unknownmunitions.com

@Ryan Avery @Formidilosus @Stockys @Salmon River Solutions @Shoot2Hunt

But a guy can order a railed rem700 correct?

 

[Billy Goat]

 

[MuleyFever]

Can someone remind me what these unrailed stocks weigh?

 

[flyfisher117]

Ordered. Hopefully I don’t regret the Sendero barrel channel.

 

[silasbowhunter]

Maybe I’m dumb but it has to be cerakoted a sponge pattern? Or can I just do one solid color?


Sent from my iPhone using Tapatalk

 

[SteveAndTheCrigBoys]

Maybe I’m dumb but it has to be cerakoted a sponge pattern? Or can I just do one solid color?


Sent from my iPhone using Tapatalk

They nixed the solid color option because it doesn’t hide carbon fiber imperfections as well as patterns.

 

[Reburn]

View attachment 909669

Thanks. bourbon out of my nose laughing burns.

 

[wind gypsy]

View attachment 909669

You wanting a railed one?

I ordered a tikka with no rail to put a full length ARCA on so might be letting one of my railed ones go. You'd have to forfeit the ability to go all queer eye for the straight guy on the initial cerakote choice though..