RokStok

[TheCougar]

Yes, mine was spot glued and screwed. I worked a razor blade deeper and deeper going around and in between the stock and buttpad. Eventually it’ll pop off. They used a nickel to quarter sized dab of epoxy at each screw and ran the screws in. I’m putting my own spacer setup in it. Haven’t done it yet though. It’ll use recessed nutserts in the first 1/4 spacer which will be permanently glued to the stock. Additional spacers and buttpad will get screwed on with machine screws.

I did the same thing to get it pried off. Eventually I got it off without damage.

 

[TaylorSnipesOutside]

Tikka says the action footprint is the same, I don't know if there's anything specific to the rokstock that would cause it not to fit but on the surface it should work.

Per UM, the answer is no

 

[atmat]

Per UM, the answer is no

@Unknown Munitions — why is that? I thought T1x stocks could be used on T3x actions without modification, while the opposite isn’t true unless you modify the cutout for the bolt release?

 

[Windblown907]

2/22/25 order. Just got an email saying my stocks had arrived at UM and they wanted to confirm my details and cerakote selection. There were 9 left available when I placed my order.

 

[Valumpessa]

Wow, good deal. Nothing yet on my 2/22/25 order but you give me hope.

 

[UpNorth89]

2/22/25 order. Just got an email saying my stocks had arrived at UM and they wanted to confirm my details and cerakote selection. There were 9 left available when I placed my order.

Same here. 14 left when I ordered.

 

[bpitcher]

Wow, good deal. Nothing yet on my 2/22/25 order but you give me hope.

I ordered on the 21st and have not heard back yet. Hopefully soon.

They said they were going through them pretty fast on the podcast.

 

[TxLite]

Received mine Tuesday (6/3/24 order). Overall finish looks better than some of my other stockys.

Will need to shim the bottom metal (Mountain tactical) for the magazine to seat properly and the barrel inlet looks slightly off center but it is fully floated, so merely cosmetic. Haven’t had a chance to shoot it yet.

Weight with spacers 33.6oz

 

[Billy Goat]

I ordered on the 21st and have not heard back yet. Hopefully soon.

They said they were going through them pretty fast on the podcast.

2/21 ?

Or 12/21?

 

[JDBAK]

I’d like to replace the limb saver pad on my Rokstock with a thicker one. Does anyone know what model limb saver I should get?

 

[IrkedCitizen]

2/21 ?

Or 12/21?

Probably the non rail Tikka in February

 

[Billy Goat]

Probably the non rail Tikka in February

2/25 or 2/24?


It's getting confusing.

 

[IrkedCitizen]

2/25 or 2/24?


It's getting confusing.

UM opened sales of Rokstok in February 2025 for non railed Tikka 100 available

 

[Raghornklr]

Ordered 2/21 no word yet

 

[Gadjet]

I’d like to replace the limb saver pad on my Rokstock with a thicker one. Does anyone know what model limb saver I should get?

I’ve been looking for the answer to this for some time now. Good luck. Seems like for whatever reason UM tends to avoid this question.

 

[bojangles808]

I’d like to replace the limb saver pad on my Rokstock with a thicker one. Does anyone know what model limb saver I should get?

I’ve been looking for the answer to this for some time now. Good luck. Seems like for whatever reason UM tends to avoid this question.

From the rokstock review thread. I got the limbsaver air tech 10809 after seeing this post. It works pretty good. I did have to Dremel off a plastic "rib" on the back so it was flush and drill new holes iirc but the shape was pretty close I didnt do any other mods. I think that one is as close as you can get

 

[bpitcher]

2/21 ?

Or 12/21?

My bad...

2/21/25 Non-railed order

 

[Axlrod]

I’d like to replace the limb saver pad on my Rokstock with a thicker one. Does anyone know what model limb saver I should get?

Just another option. I just received a pad from Backstop. It is about 1/2" thicker than the Limbsaver that comes on the Rokstok. It is about perfect length now for me. I don't know if @Unknown Munitions ever considered just offering a couple different pad options for sale?

 

[Grizzle]

Just another option. I just received a pad from Backstop. It is about 1/2" thicker than the Limbsaver that comes on the Rokstok. It is about perfect length now for me. I don't know if @Unknown Munitions ever considered just offering a couple different pad options for sale?

Be nice if they would ship it to Canada but no luck for us snow Mexicans

 

[ID_Matt]

Be nice if they would ship it to Canada but no luck for us snow Mexicans

Just about spit out my coffee laughing