Ram94
WKR
- Joined
- Jul 24, 2019
- Messages
- 699
05/24 Canadian order just showed up.
Bare carbon, no rail, 3B
Looking forward to getting behind it!
Bare carbon, no rail, 3B
Looking forward to getting behind it!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Sounds like the no rail option was the way to go for quick delivery. Might go that way on stock number 2
What rail is that? Would you recommend it?T1x is in.
Rail is the DIP 25MOA rail. It’s good, but I don’t have much to compare it to. It slides onto the integral rail (so it can’t “pop off”) and is fastened with two screws.What rail is that? Would you recommend it?
I will look into those. Have a T1X with a RokStok coming from UM. Myself and UM didn’t realize that the tikka rings weren’t gonna work on the T1X. We were discussing different options, I think we are going with the Area 419 option, unless I like the go the route you went. Thanks!Rail is the DIP 25MOA rail. It’s good, but I don’t have much to compare it to. It slides onto the integral rail (so it can’t “pop off”) and is fastened with two screws.
The level is the MKM XLP rail level, which is also a quality product.
Normally it has a SWFA 6x, but I sent it to a friend whose scope crapped out right before the season.
The Area 419 also slides on and is pinned in place. I’m sure it’s fine.I will look into those. Have a T1X with a RokStok coming from UM. Myself and UM didn’t realize that the tikka rings weren’t gonna work on the T1X. We were discussing different options, I think we are going with the Area 419 option, unless I like the go the route you went. Thanks!
The Area 419 also slides on and is pinned in place. I’m sure it’s fine.
The dovetail size is different on T1x vs T3x receiver, so T3x rings don’t work.
I believe Sportsmatch makes rings that use the integral rail, but they don’t have inclination built in — which is a necessity if you’re shooting any sort of distance with a 22LR.
I have the Sportsmatch rings on a huron 3-9 and didn’t have any issues at 225. I haven’t tried to shoot any past that so I may have been right on the edge of my scope adjustment. This is with automatch and federal gold medal- so not sure about the drop on subs.The Area 419 also slides on and is pinned in place. I’m sure it’s fine.
The dovetail size is different on T1x vs T3x receiver, so T3x rings don’t work.
I believe Sportsmatch makes rings that use the integral rail, but they don’t have inclination built in — which is a necessity if you’re shooting any sort of distance with a 22LR.
Sorry, I should’ve said I only shoot subs with it.I have the Sportsmatch rings on a huron 3-9 and didn’t have any issues at 225. I haven’t tried to shoot any past that so I may have been right on the edge of my scope adjustment. This is with automatch and federal gold medal- so not sure about the drop on subs.
Your ejection port flush? That's the quickest tellit does look that way now that you mention it. But I just checked and everything looks fine and they sat right in when I put them in. It could also be factory contour barrel with a sendero cut forend exaggerating the effect.
Now I’m just debating taking the sling swivels out and storing them for when I might actually use a sling, which is almost never
I will look into those. Have a T1X with a RokStok coming from UM. Myself and UM didn’t realize that the tikka rings weren’t gonna work on the T1X. We were discussing different options, I think we are going with the Area 419 option, unless I like the go the route you went. Thanks!
+1 on the Sportsmatch if it’s going to be mainly for hunting, a 22lr drops roughly 13 mils at 300yds with subs so a good number of scopes should be able to do that with internal adjustment plus the reticle. It just depends on how far your wanting to shoot really, in my opinion aesthetically the Sportsmatch look the best also.I have the Sportsmatch rings on a huron 3-9 and didn’t have any issues at 225. I haven’t tried to shoot any past that so I may have been right on the edge of my scope adjustment. This is with automatch and federal gold medal- so not sure about the drop on subs.

Big fan of my rokstock, especially the spigot @Salmon River Solutions View attachment 775438
27”Nice!! How wide was he?
If you mean from Stocky’s, there may have been a couple small weather events that caused some delays in general deliveries and production for many SE industries.My stock should have been at UM over a week ago. Haven't heard a word yet. Getting anxious.