RokStok

[Castle Rock]

Sounds like that to me

 

[Ryan Avery]

Maybe @ODT is “a guy” in this story?

Exactly

 

[Ironoperator87]

Shout out to @Unknown Munitions and Cody McKenzie Recently received my first Rokstok and I have to say I am very pleased. It’s a February order non- railed tikka that I put my 6.5 prc roughtec B/A into. It dropped right in, no drama, the fit and finish is excellent and it maintained a perfect zero from my previous Xlr element MG all while dropping a pound. Decided to shoot it form style off a cinder block and bags since I didn’t have a rail for a bipod. I don’t know if it was the stock or the cinder block and bags but I was watching bullet holes appear in paper which was difficult to achieve with my previous set up with a bipod.

 

[CoryM181]

How long after the email for color confirmation did you guys receive your stock?

 

[Gettincloser]

How long after the email for color confirmation did you guys receive your stock?

About 2 weeks

 

[Ironoperator87]

I missed the email and called in exactly two weeks later about confirmation. It felt like I had it less than a week after the phone call.

 

[JollyRoger]

My first Rokstok on top: 6CM Tikka, 20” Bartlein 3B, fluted, UM bolt knob, UM low rings, Maven RS1.2, Sterk bolt shroud, KRG Midas trigger, High Desert bottom metal, LPM Mach S suppressor

Second one on bottom: 223 Tikka, 18” MullerWorks barrel, fluted… their equivalent profile to 3B (its thicker though), UM medium rings, Maven RS1.2 (pic shows an SWFA 5-20), High Desert bottom metal, Diligent Defense Enticer L-Ti suppressor

 

[Helislacker]

For anyone who has installed the LOP kit, do you guys think these would work as an alternative if modified? I only ask because the shipping alone for the LOP kit to where I live is $140 USD so I’m looking for a more affordable alternative. Here’s the link - https://www.gobles.ca/kick-eez-1-2-black-spacer.html

Much appreciated.

 

[RWT]

For anyone who has installed the LOP kit, do you guys think these would work as an alternative if modified? I only ask because the shipping alone for the LOP kit to where I live is $140 USD so I’m looking for a more affordable alternative. Here’s the link - https://www.gobles.ca/kick-eez-1-2-black-spacer.html

Much appreciated.

Try these if you have Amazon Prime

https://www.amazon.com/gp/aw/d/B005KW7FGU?psc=1&ref=ppx_pop_mob_b_asin_title

Grind to fit so you can order a few to test and pick the one that works best

 

[Gettincloser]

For anyone who has installed the LOP kit, do you guys think these would work as an alternative if modified? I only ask because the shipping alone for the LOP kit to where I live is $140 USD so I’m looking for a more affordable alternative. Here’s the link - https://www.gobles.ca/kick-eez-1-2-black-spacer.html

Much appreciated.

Absolutly. As long as you don't mind making the "adjustments". Just make sure the screws are long enough.

 

[Windblown907]

I reached out to oldballs to see if he’d be interested in making a recoil pad to fit a Rokstok and was honestly not expecting him to say yes. I’m out of town for another month but will probably send him my pad to use as a template unless one of you guys beat me to it. Here is a link to the one he makes for the HNT 26. Looks like a good alternative to the spacer kit.

OBI CUSH PAD

We've designed a super soft buttpad made out of high-quality polyurethane elastomer to provide added comfort when shooting while maintaining accuracy and reducing recoil. Designed to fit MDT Chassis Reduces recoil Quality weather resistant and temperature stable material Made from shock...

oldballsinc.com

 

[Willie IV]

I reached out to oldballs to see if he’d be interested in making a recoil pad to fit a Rokstok and was honestly not expecting him to say yes. I’m out of town for another month but will probably send him my pad to use as a template unless one of you guys beat me to it. Here is a link to the one he makes for the HNT 26. Looks like a good alternative to the spacer kit.

OBI CUSH PAD

We've designed a super soft buttpad made out of high-quality polyurethane elastomer to provide added comfort when shooting while maintaining accuracy and reducing recoil. Designed to fit MDT Chassis Reduces recoil Quality weather resistant and temperature stable material Made from shock...

oldballsinc.com

I also emailed them to ask about a recoil pad to extend the LOP on the Peak 44 Bastion. He said they'd consider it so if anyone else wants something a little more than 13.25ish on their Bastion reach out to them.

 

[Roor]

I also emailed them to ask about a recoil pad to extend the LOP on the Peak 44 Bastion. He said they'd consider it so if anyone else wants something a little more than 13.25ish on their Bastion reach out to them.

I put an airtech slip on recoil pad on the bastion and the LOP is about perfect for me now.

 

[The Harbor Master]

I put an airtech slip on recoil pad on the bastion and the LOP is about perfect for me now.

I'm looking at the Bastion and was thinking I'd do the same. Good to know. Have you measured LOP with that pad?

 

[Roor]

I'm looking at the Bastion and was thinking I'd do the same. Good to know. Have you measured LOP with that pad?

I’ll get you a measurement today

 

[Roor]

I'm looking at the Bastion and was thinking I'd do the same. Good to know. Have you measured LOP with that pad?

It’s around 14”

 

[The Harbor Master]

It’s around 14”

Thank you

 

[kit.critchlow]

For those who have a Tikka in a rockstock with a 6UM -

I just purchased a Tikka in 6UM 40 from a friend. It has the factor tikka stock and mag from a 7WSM (short). The mag is going to be too short for the 115 DTAC I'm sure. I plan to get a rockstock when available again.

Are most of these tikka builds using the short action or long action bolt stop for this setup in a RockStock?

It seems with the factory setup will work if I change the bolt stop to long and get a long action Mag.

I'm just gathering info to prepare and don't want to waste money on the factor setup if it will be solved with the RockStock later. Info is appreciated!

 

[Schmo]

For those who have a Tikka in a rockstock with a 6UM -

I just purchased a Tikka in 6UM 40 from a friend. It has the factor tikka stock and mag from a 7WSM (short). The mag is going to be too short for the 115 DTAC I'm sure. I plan to get a rockstock when available again.

Are most of these tikka builds using the short action or long action bolt stop for this setup in a RockStock?

It seems with the factory setup will work if I change the bolt stop to long and get a long action Mag.

I'm just gathering info to prepare and don't want to waste money on the factor setup if it will be solved with the RockStock later. Info is appreciated!

Run the long bolt stop and the L mag.

 

[Grundy53]

Received my February order today.

Sent from my SM-S928U using Tapatalk