Rokstok Lite

[Formidilosus]

Maybe I’m not being clear. If the carbon RS Lites are going to be 13.5”, I understand that because you’re catering to what consumers will buy.

I’m asking about your wooden RS Lite in the pic above. Is that 13.5”? I thought you could specify LOP when ordering from Alpine.

You can. That stock was the one initially made that was used for the scan for the carbon stocks- it wasn’t made for me.

 

[Antares]

You can. That stock was the one initially made that was used for the scan for the carbon stocks- it wasn’t made for me.

Roger. That makes sense.

If you were getting one made for you, what LOP would you get. I’m think 14.25-14.5” (like all my other rifles).

 

[rbutcher1234]

Roger. That makes sense.

If you were getting one made for you, what LOP would you get. I’m think 14.25-14.5” (like all my other rifles.

Not to be a dick…. But why wouldn’t you do it like all your other rifles?

 

[Antares]

Not to be a dick…. But why wouldn’t you do it like all your other rifles?

I am planning on getting it like all my other rifles. I know Form shoots similarly long LOPs as me, so I figured his RS Lite would look like the one I’m thinking of ordering. Glad I asked, because it’s not (it’s 13.5”). So now I’m asking, if he had one built just for him, would he go longer (14.25-14.5”)? That would give him an opportunity to tell me if there is something about the RS Lite that makes a different LOP than your standard desirable.

If I’m dropping $2k on a stock, it seems prudent to take a few minutes to think about the dimensions and check all my assumptions before pressing ahead.

Make sense?

 

[Speaks]

I am planning on getting it like all my other rifles. I know Form shoots similarly long LOPs as me, so I figured his RS Lite would look like the one I’m thinking of ordering. Glad I asked, because it’s not (it’s 13.5”). So now I’m asking, if he had one built just for him, would he go longer (14.25-14.5”)? That would give him an opportunity to tell me if there is something about the RS Lite that makes a different LOP than your standard desirable.

If I’m dropping $2k on a stock, it seems prudent to take a few minutes to think about the dimensions and check all my assumptions before pressing ahead.

Make sense?

Its the only reason I havnt placed my order yet is I cant make up my mind on lop.

I run my regular rokstocks at 14 which seems good but Ive got one set up with 14.25 and cant make up my mind. I dont really want plastic spacers in a stock I am paying $2250 for.

Was considering asking him to make it 14 with the .6 pad but selling me a 1 inch pad also ground to fit in case I change my mind.

 

[Coopsdaddy]

2250 for a stock?

 

[Tanner]

2250 for a stock?

Think that’s for the wood version… if it’s $600 for the CF I’ll pass… haha

 

[Formidilosus]

Roger. That makes sense.

If you were getting one made for you, what LOP would you get. I’m think 14.25-14.5” (like all my other rifles).

14.5” maybe 14.75”. I believe the actual wood Rokstock that was made for me is 14.75”.

 

[Coopsdaddy]

 

[Formidilosus]

Think that’s for the wood version… if it’s $600 for the CF I’ll pass… haha

$600 for a carbon stock is too much?

 

[Tanner]

$600 for a carbon stock is too much?

No, I fat fingered that one. Should have read “if it’s 2,250 for the CF stock”…

 

[Formidilosus]

I am planning on getting it like all my other rifles. I know Form shoots similarly long LOPs as me, so I figured his RS Lite would look like the one I’m thinking of ordering. Glad I asked, because it’s not (it’s 13.5”). So now I’m asking, if he had one built just for him, would he go longer (14.25-14.5”)? That would give him an opportunity to tell me if there is something about the RS Lite that makes a different LOP than your standard desirable.

If I’m dropping $2k on a stock, it seems prudent to take a few minutes to think about the dimensions and check all my assumptions before pressing ahead.

Make sense?

Personally, I’d get it at 14.5” with a 1” Pachmyer pad. Then you could go from 13.75 to 14.5” with just a pad swap.

 

[Formidilosus]

No, I fat fingered that one. Should have read “if it’s 2,250 for the CF stock”…

Ahhh. Haha. Yes.

 

[Formidilosus]

Its the only reason I havnt placed my order yet is I cant make up my mind on lop.

I run my regular rokstocks at 14 which seems good but Ive got one set up with 14.25 and cant make up my mind. I dont really want plastic spacers in a stock I am paying $2250 for.

Was considering asking him to make it 14 with the .6 pad but selling me a 1 inch pad also ground to fit in case I change my mind.

Easy peasy. As I suggest for @Anteras above- 14.5” with a 1” Pachmyer pad, then with just swapping pads you can go down to 13.75”.

 

[Tanner]

Ahhh. Haha. Yes.

Although the wood versions are kinda’ giving me… wood…

 

[benconfused]

For some asking here, in the podcast this week Jake said the first run they would target 150 pieces, pre-sale goes live online and onsite on Friday of the Western hunt expo.

 

[Formidilosus]

Although the wood versions are kinda’ giving me… wood…

You need one. The is no comparison with the wood stocks to anything- absolutely fantastic.

 

[Speaks]

Easy peasy. As I suggest for @Anteras above- 14.5” with a 1” Pachmyer pad, then with just swapping pads you can go down to 13.75”.

Dont the decelerators come in either half or one inch so only .5 of adjustment? Or you mean just change to a totally different pad?

 

[Zork]

Will left hand tikka inlets be an option right from the start?

Anyone?

 

[Formidilosus]

Dont the decelerators come in either half or one inch so only .5 of adjustment? Or you mean just change to a totally different pad?

Totally different pads.