Revic and strelok data isn’t matching

[Gabe69]

Put in same info but isn’t matching drop and fps at different ranges am I missing something?

 

[hereinaz]

Should be very close, sometimes not exact. How far off?

In my experience, the vast majority of differences come from some user input or how environmentals are entered, whether auto or not. All the inputs need to be the same for the bullet, rifle, and environmental conditions. Carefully double check everything. I think the Revic has some onboard sensors, so you have to figure that out and match it.

 

[Gabe69]

Yeah gotta double check everything. Shooting at 425 yds and Revic app gives me 9.2 moa and strelok gave me 8.5 moa.

 

[hereinaz]

Yeah gotta double check everything. Shooting at 425 yds and Revic app gives me 9.2 moa and strelok gave me 8.5 moa.

Shouldn’t be that far off at 425.

 

[Gabe69]

 

[Harvey_NW]

I used to use the basic version of Strelok and felt like I was always tweaking things or trying to figure out why it wasn't perfect. When I got my Sig with AB the solutions were quite a bit different, I validated the AB software and haven't had an issue since.

 

[Gabe69]

I used to use the basic version of Strelok and felt like I was always tweaking things or trying to figure out why it wasn't perfect. When I got my Sig with AB the solutions were quite a bit different, I validated the AB software and haven't had an issue since.

I heard good things about its I’m hitting good with it I might put something in wrong with the Revic app. Anyone have experience with the leica app? Looking to get the geovid R soon.

 

[mxgsfmdpx]

Throw it in shooter app and take a peak there as well. Or run the calcs on the Berger ballistics site, their calcs are usually pretty close

 

[JF_Idaho]

Things to check
Velocity
Sight height
Changing strelok zeroing weather
Checking inputs on strelok powder temperature

 

[mddat]

Are you using the G7 curve in both apps? My revic app defaults to Doppler curve with 147 ELDM and changes things a bit

 

[Gabe69]

Found the problem I’m a DA it was scope height one was 1 in and the other was 1.97