Recommendation on delaminating Rokstok limbsaver

[cal30_sniper]

Was shooting yesterday when one of my Rokstok limbsavers began to delaminate from its plastic base on the buttstock as I whipped it through some Hunter drills. This is a pretty heavily used stock that’s been through several members, so not a mark against its quality by any means, but looking for some feedback from others who may have encountered/fixed something similar.

It’s the rubber portion that’s separating from the plastic plate that mounts to the stock:


Option 1: glue it back down with something? what?
Option 2: replace with another limbsaver assembly? Does a regular Tikka one fit?

 

[Caseknife]

I would take it off so the screws don't get filled and reattach with black silicone, let it dry and reinstall. Be careful reinstalling because the cf is not real thick where the screws go in.

 

[ckleeves]

3M 08008 works really well on recoil pads IME.

 

[Macintosh]

I bet if you call stocky’s they will either sell you a recoil pad or tell you the sku so you can buy one that’s pre-fit. It wouldnt stop me from fixing what you have but in case it doesnt work long term, recoil pads are cheap.

 

[TX_Diver]

Few drops of superglue fixed mine