Question for Kuiu users

Joined
Oct 27, 2022
Messages
23
Location
Idaho
I just received my Kuiu Pro LT and I have been playing around with configuring it. To put it into load carrying mode you have to unhook a little metal hook at the bottom of the pack. Unhooking this thing is a huge pain. I can barely unhook it under the ideal conditions of my house and it still takes me many minutes of struggling. I don't really see how this would be possible with cold hands outdoors. Do Kuiu users even bother securing this hook or do you just leave it undone? It seems like the bag could be used with it unhooked and you wouldn't suffer any consequences. Just curious what other people's experiences with this are.
 

11boo

WKR
Joined
Feb 24, 2016
Messages
2,462
Location
Grand Jct, CO
Mine is an older one, an ultra 3000. Same issue, but my hooks are plastic.
Very tight fit in the fabric loop. I took some emory cloth and softened the plastic hook up a bit.
 

BBob

WKR
Joined
Jun 29, 2020
Messages
4,404
Location
Southern AZ
My early one falls out by itself all of the time and is useless, the newer one with the improved hook I don't find very hard to get it unhooked. Have they changed the design again where it's harder?
 

Tod osier

WKR
Joined
Sep 11, 2015
Messages
1,704
Location
Fairfield County, CT Sublette County, WY
I just received my Kuiu Pro LT and I have been playing around with configuring it. To put it into load carrying mode you have to unhook a little metal hook at the bottom of the pack. Unhooking this thing is a huge pain. I can barely unhook it under the ideal conditions of my house and it still takes me many minutes of struggling. I don't really see how this would be possible with cold hands outdoors. Do Kuiu users even bother securing this hook or do you just leave it undone? It seems like the bag could be used with it unhooked and you wouldn't suffer any consequences. Just curious what other people's experiences with this are.

This isn't helpful, but mine always comes unhooked by itself.
 
OP
B
Joined
Oct 27, 2022
Messages
23
Location
Idaho
Maybe it will loosen up a bit or I will get more adept at it with some practice. I'll keep playing with it. Thanks for the advice!
 
OP
B
Joined
Oct 27, 2022
Messages
23
Location
Idaho
Depending on the load, I might have it hooked or unhooked.

After playing around with it a bit, I found I don't have any trouble hooking and unhooking it. Assuming yours is the same as mine, I pull it taut, pinch the middle of the loop for clearance, and slide out the hook. I can do this fine with gloves. Here it is:


Thanks for the video. Mine isn't anywhere near that loose and my bag appears to have much more tension. If I could get the bag off of the top forks first, it wouldn't be a problem, but the tension across the bag makes getting the top or the bottom unhooked difficult. The first time I did it I muscled the top forks off first, but that seems like a risky thing to do over and over again.
 
Joined
Dec 15, 2019
Messages
507
Location
Alaska
That makes sense. For the top forks to come off, that also requires loosening or unbuckling of the bottom straps first so that the pack can slide up and off of the frame. If you unbuckle those bottom straps in preparation for load configuration, then that is also what gives you the space to access the little hook strap. If you leave them tightened and buckled, it's hard to find room to access it. Luckily, the only time you'd need to undo the hook strap is if you're about to use load carrying mode or need to remove the bag from the frame, so loosening the bottom straps is part of the process anyway.
 

11boo

WKR
Joined
Feb 24, 2016
Messages
2,462
Location
Grand Jct, CO
On my old ultra bag, the loop is much smaller than that video one. The hook was an absolute bear to get in/out.
 

Venom One

WKR
Joined
Sep 25, 2019
Messages
371
Location
PNW
That makes sense. For the top forks to come off, that also requires loosening or unbuckling of the bottom straps first so that the pack can slide up and off of the frame. If you unbuckle those bottom straps in preparation for load configuration, then that is also what gives you the space to access the little hook strap. If you leave them tightened and buckled, it's hard to find room to access it. Luckily, the only time you'd need to undo the hook strap is if you're about to use load carrying mode or need to remove the bag from the frame, so loosening the bottom straps is part of the process anyway.

This is what I was trying to say, but you gave a much better explanation.
 

Stroke250

Lil-Rokslider
Joined
Aug 27, 2019
Messages
219
Location
Idaho
Depending on the load, I might have it hooked or unhooked.

After playing around with it a bit, I found I don't have any trouble hooking and unhooking it. Assuming yours is the same as mine, I pull it taut, pinch the middle of the loop for clearance, and slide out the hook. I can do this fine with gloves. Here it is:


Yours looks to have more slack than mine(and I’m sure the original posters). I modified mine with a file so the hook/bend is gone. I’ll try to get a pic of what I did.
 

Stroke250

Lil-Rokslider
Joined
Aug 27, 2019
Messages
219
Location
Idaho
Here is my modified hook.
 

Attachments

  • image.jpg
    image.jpg
    220.2 KB · Views: 10
  • image.jpg
    image.jpg
    177.2 KB · Views: 11
Top