- Joined
- Sep 28, 2023
- Messages
- 1,802
I ordered a set of UM 34mm HIGH; for T3X; hope it works out.Master Sporter recently donated its Maven to a different rifle, just need to know which rings.
Don’t worry about the kid, he’s spoiled.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I ordered a set of UM 34mm HIGH; for T3X; hope it works out.Master Sporter recently donated its Maven to a different rifle, just need to know which rings.
Don’t worry about the kid, he’s spoiled.
Master Sporter is still setup for 22CM, it'll barely move w all the weight, going to need at the mag to see impacts though.Master Sporter!
I have UM's High Tikka rings on my T3X Superlite - but I prefer a more 'heads up' position.I ordered a set of UM 34mm HIGH; for T3X; hope it works out.
If you do find glare to be an issue, I'm pretty sure it's the Kahles sunshade that has the same thread pitch. Pretty sure that also means there's a Tenebraex ARD that also fits.@Formidilosus how does the ZP5 handle glare from the sun? I know that varies among scopes and even top tier scopes handle it differently. Nightforce handles glare quite well whereas (apparently) Tangent Theta handles it badly. The Minox is more similar to the TT than the NF so does it handle glare poorly as well?
The ARDs aren't long ... give me a couple of hours and I can measure it up.Can you just remove the honeycomb from an ARD and use it as a sunshade that isn't 3"+ long?
I think they're somewhere in the area of 1.5-2" instead of 3" or more for a sun shade. I sometimes worry about sunshades being so long since it gives any impacts on them a lot of leverage to mess up the objective threads. That concerns me since I tend to just leave my sun shades on my scopes 24/7. But it's probably not an issue.The ARDs aren't long ... give me a couple of hours and I can measure it up.
Ew! haha.but I prefer a more 'heads up' position.
Funny enough, I just got back from Arizona coues hunting a couple weeks ago and that's what inspired me to upgrade another rifle's scope.Glare is not an issue more than the average scope with the Minox. Ask me how I know, I shoot in ******* Arizona.
@Formidilosus how does the ZP5 handle glare from the sun? I know that varies among scopes and even top tier scopes handle it differently. Nightforce handles glare quite well whereas (apparently) Tangent Theta handles it badly. The Minox is more similar to the TT than the NF so does it handle glare poorly as well?
Yes, Form has chided me ...Ew! haha.
Gotcha.Pretty sure I have UM's X-Highs on my T3X Superlite - but I prefer a more 'heads up' position.
This is the perfect responseEw! haha.
Oops - it's the High in UM Tikka rings (1.3") that I have.Gotcha.
I ordered the Tikka rings so they only come in LOW and HIGH.
The LOW worked fine for my 4-16x42 atacr.
I'm assuming the bell will clear on the HIGH hopefully not too much and hopefully I won't need moleskin to raise my comb.
I just posted this in another ZP5 thread, but worth adding here too as this is our main source:If you want a more compact Minox hunting scope check out the ZP5 3-15x50 with the MR2 or MR5 reticle. Bought are usable at low magnification without illumination.
I probably should have kept my lows just to check to see if if they work but the chart on the UM website makes it seem like the bell would hit the barrel with the Lows.Oops - it's the High in UM Tikka rings (1.3") that I have.
Apologies for the error; I had quickly searched on their site so I thought I was posting the correct ones, but I'd landed on their Premier Rings page. Have fixed in my inital post so I don't confuse anyone.