nubraskan
FNG
- Joined
- Dec 9, 2023
- Messages
- 83
Selling my Mach 34 with accessories for $1800 (tyd, shipped). The bow is in overall good condition, cosmetic blemishes only (described / pictured below), functionally 100% good. Still on the original strings which have plenty of life left, new center serving. Only selling to downsize
I can take additional pictures if requested.
Included accessories (Retail value in brackets):
TAP Titanium draw stops ($38)
Ripcord Ratchet, IMS mount, micro adjust ($260)
Includes the unused felt and rubber shelf pads
Spot Hogg Fast Eddie XL, double pin, 0.019", dovetail ($335)
Includes sight tapes (1 calibration scale, only tape #13 and #14 missing), MRT Ring, large dovetail screw
Tightspot Airlock quiver ($200)
Shrewd 8* Front QD stabilizer mount ($20)
Bee Stinger adjustable sidebar QD mount ($90)
CBE Torx Micro 15" Carbon Front Stabilizer ($115)
CBD Torx Micro 10" Carbon Side Stabilizer ($205)
Knock on PSE UV grip (uninstalled, $50)
PSE EZ 220 shim kit ($60)
Raptor Peep, 3/16" ($20)
($1393 total original retail accessory value)
I would be willing to swap out a few of the accessories if interested. I have a Knock On Checkmate quiver and a Hamskea Epsilon micro if you'd prefer those, or I can add them in addition to everything above (pictures upon request).
Here's the cosmetic blemishes. It has some scuff marks on the front of the riser, and the bottom limb pocket is faded / discolored (Whoever was running the anodizing process at PSE didn't dye it dark enough, might be covered under warranty. I have not submitted the bow warranty paperwork which is included)
I can take additional pictures if requested.
Included accessories (Retail value in brackets):
TAP Titanium draw stops ($38)
Ripcord Ratchet, IMS mount, micro adjust ($260)
Includes the unused felt and rubber shelf pads
Spot Hogg Fast Eddie XL, double pin, 0.019", dovetail ($335)
Includes sight tapes (1 calibration scale, only tape #13 and #14 missing), MRT Ring, large dovetail screw
Tightspot Airlock quiver ($200)
Shrewd 8* Front QD stabilizer mount ($20)
Bee Stinger adjustable sidebar QD mount ($90)
CBE Torx Micro 15" Carbon Front Stabilizer ($115)
CBD Torx Micro 10" Carbon Side Stabilizer ($205)
Knock on PSE UV grip (uninstalled, $50)
PSE EZ 220 shim kit ($60)
Raptor Peep, 3/16" ($20)
($1393 total original retail accessory value)
I would be willing to swap out a few of the accessories if interested. I have a Knock On Checkmate quiver and a Hamskea Epsilon micro if you'd prefer those, or I can add them in addition to everything above (pictures upon request).
Here's the cosmetic blemishes. It has some scuff marks on the front of the riser, and the bottom limb pocket is faded / discolored (Whoever was running the anodizing process at PSE didn't dye it dark enough, might be covered under warranty. I have not submitted the bow warranty paperwork which is included)
