Prvi Partizan Brass quality

[EastHumboldt]

I'm looking at buying a few hundred new cases in 7mm-08 from Crate Holdings LLC and the brand is PRVI Prtizan. (found them on ammoseek) I've heard of Prvi and seen their brand in various searches, but no experience beyond a friend of mine had some .308 ammo we shot at the range.

Anyone here have any experience with their brass? or primers for that matter.

 

[4090Sharps]

I use Prvi brass in my 22 Hornet, and used to use a lot of it for shooting 9.3x57 (from 8mm Mauser), 9.3x62, and 9.3x74R (I spent a few years playing with a 9.3x74R double rifle and cheap Swedish rifles). I annealed the larger rounds with each firing, but the brass held up well with loads near max pressure.

I did start to lose some brass to loose primer pockets around the 5th firing with the 9.3x62.

I'm not the type to sort brass by weight or anything, so I can't comment on brass weight consistency.

 

[NRA4LIFE]

I use it in my 8mm Mauser, no problems whatsoever. They are on their 2nd to 3rd firing.

 

[menhaden_man]

it’ll work but not as consistent as Peterson or other top shelf brass. But the PPV has been pretty accurate for me in 7 RM.

 

[*zap*]

I always liked it.

 

[Weldor]

Loaded a ton of 308 prvi brass, no issues other than loose primer pockets after 3-5 on some of it. Generally had good luck with it.

 

[long hunter]

Shoot it in a 300 win. mag. does just fine.

 

[Edge]

Have 3+ firings on some of my Prvi 375 H&H brass, no issues.

 

[EastHumboldt]

I’ve got some on order. I’ll report back on how it goes.

 

[medvedyt]

im using prvi brass in 9.3x62, 9.3x74r and 7x64 and not a problem. i im using 8x57js in a 9.3x57 as well with no issues