powder measure recomendation

[jlink83]

What is everyone using to measure their powder by volume these days? Looking to possibly update my old measure.

 

[sabotloader]

What is everyone using to measure their powder by volume these days? Looking to possibly update my old measure.

This is what I use. I have used other but I always return to this one. Other will have other suggestions...

Thompson Center Brass Volume measure.

The BIG thing is to develop a method of filling and cutting the powder with the sliding top. Once developed repeat it every time.

 

[mfllood3800]

I use the cheap clear plastic tubes to find the "volume" charge size. Then I weigh it and load all my cheap clear tubes with that exact same weighed volume charge amount.

 

[KChunter71]

This is what I use. I have used other but I always return to this one. Other will have other suggestions...

Thompson Center Brass Volume measure.

The BIG thing is to develop a method of filling and cutting the powder with the sliding top. Once developed repeat it every time.

Wish I can find these instock.

What flask you using that works with BH209 when doing by volume into the measure? I had one that worked and it broke. Tried two others and both with get powder stuck.

 

[long hunter]

Mine are all hand made bye me of deer antler. But then I shoot flint long rifles and am a bit of a traditionalist.

 

[EdP]

I'm with Longhunter. Deer antler or wood, fill from the horn then down the barrel.

 

[huck]

I use an old TC brass measurer goes up to 150 gr. ,Iwrap tape around it for 120 so Idont mess up .

 

[long hunter]

Also a piece of river cane works very nice, and authentic

 

[Eastcoasthunter94]

I first eye ball my powder in a measuring tube by volume then I use a digital scale to weigh each load out. I aim for 77-78 grains by weight which equates to roughly 110 grains by volume