Portable Camp Stoves at Lowes

Butcher8

Lil-Rokslider
Joined
Mar 18, 2023
Messages
111
we use an old coleman 2 burner stove - it simmers well and if we really need to tone it down use a heat diffuser ($10 online or usually $2 at the second hand store). we just bought a one burner coleman which seems to not simmer as well, but the heat diffuser takes care of that. it packs much smaller so will be our new go to for outside cooking
 

Tell

FNG
Shoot2HuntU
Joined
Mar 1, 2023
Messages
78
I have the stove running pretty good, but it wants to blow some smoke back out the front and sounds like it’s struggling for air when I have it ripping pretty good. Is that a symptom of the flue being undersized? I’m considering the 3” option but it doesn’t look like anybody’s gotten around to posting their results doing that.

Any tips from users?
 

Choupique

WKR
Joined
Oct 2, 2022
Messages
574
Yea, its a stack problem. If you get it rolling hard enough it'll flash out from lack of air.

I'm converting mine to 3" at some point this off season to test out. I think it's gonna rip pretty good with a proper sized exhaust pipe.
 

svivian

WKR
Joined
Mar 16, 2016
Messages
3,204
Location
Colorado
I have the stove running pretty good, but it wants to blow some smoke back out the front and sounds like it’s struggling for air when I have it ripping pretty good. Is that a symptom of the flue being undersized? I’m considering the 3” option but it doesn’t look like anybody’s gotten around to posting their results doing that.

Any tips from users?
My temporary solution has been to put the first section of pipe on then place my seek outside stove pipe over the top.
 

Tell

FNG
Shoot2HuntU
Joined
Mar 1, 2023
Messages
78
Thank you both. I appreciate it. I’ll update when I get it rigged up right.
 

Legend

WKR
Joined
Jun 13, 2017
Messages
942
I'm done with modifications and ready to test. My plan is to use my titanium 3 inch pipe from lite outdoors for the stove pipe.

I bought a flange off Amazon. Then cut a 3 inch hole in the top with a dremmel (my hole saw was too dull). Originally I planned to rivet but decided the stove would pack better if I could remove the flange (using goats to pack). So I went with bolts and wing nuts. Then I decided to but in a quality damper. It took a little grinding but it fits great now. And the damper can remain installed in the flange for transport.

I also cut off the decorative deer on the door. Then I filled the holes at the bottom with high temp jb weld ( I wa1000010230.jpg1000010240.jpg1000010241.jpgnt full control over air flow).

I'll try to test it this weekend but there is no reason it should work really well now.
 

Matt5266

WKR
Joined
Sep 19, 2021
Messages
665
Location
SW Idaho
I'm done with modifications and ready to test. My plan is to use my titanium 3 inch pipe from lite outdoors for the stove pipe.

I bought a flange off Amazon. Then cut a 3 inch hole in the top with a dremmel (my hole saw was too dull). Originally I planned to rivet but decided the stove would pack better if I could remove the flange (using goats to pack). So I went with bolts and wing nuts. Then I decided to but in a quality damper. It took a little grinding but it fits great now. And the damper can remain installed in the flange for transport.

I also cut off the decorative deer on the door. Then I filled the holes at the bottom with high temp jb weld ( I waView attachment 791343View attachment 791344View attachment 791345nt full control over air flow).

I'll try to test it this weekend but there is no reason it should work really well now.
Awesome. Looking forward to hearing how it works.
 
Top