ZDR
WKR
- Joined
- Apr 20, 2013
- Messages
- 897
for split limb bow. Looking at the Synunm or Bow Master. Bowmaster cheaper but the Synunm looks a bit more straightforward to use. Appreciate any reviews/opinions on these.
thanks
thanks
Just curious as to why not? Can't you just remove the press after the strings and cables are off, then disassemble it?^^^^^ Great point, you should be able to fully disassemble a bow with the Synumn. I tried with the BM and it was a no go.
Thanks much. Just ordered the Synunm from Lancaster.
If I set the cables in the correct position to press the bow, there wasn't enough length in the jack screw to take out all the preload on the limbs.Just curious as to why not? Can't you just remove the press after the strings and cables are off, then disassemble it?
Yeah. It works but is slow and cumbersome.Thought that might be it. I only used the Bowmaster one time to change a string. Just PITA.
What bow were you working on? Just curious, I used a bowmaster with split limb adaptors to swap limbs on a vector turbo, not the quickest way to do it but worked ok^^^^^ Great point, you should be able to fully disassemble a bow with the Synumn. I tried with the BM and it was a no go.
PSE Stinger.What bow were you working on? Just curious, I used a bowmaster with split limb adaptors to swap limbs on a vector turbo, not the quickest way to do it but worked ok
Sent from my SM-G973F using Tapatalk
Will the synunm work with a prime ct3? The bow master with the parrellel limb hooks does not unfortunately