Polonium 30 mounting help

[Tanner]

Anybody care to chime in on their preferred mounting method for a Polonium 30 can? Rifles used will be 22s, 6s, and 6.5s all with sporter barrels so I was going to have them threaded 1/2x28” to avoid any issues.

Lack of info and being a total newb to cans has me scratching my head on the best method for mounting. Tell me what muzzle devices you’ve used for this can, please!

Tanner

 

[9.3koolaid]

If they're all threaded 1/2x28 :

Direct Thread Titanium – Rearden MFG

www.reardenmfg.com

And I'd rocksett that adapter on

 

[Tanner]

If they're all threaded 1/2x28 :

Direct Thread Titanium – Rearden MFG

www.reardenmfg.com

And I'd rocksett that adapter on

That looks like it would work.

Forgot to add that the Polo 30 also came with a 5/8x24 adapter/end cap already on it, from the factory. Would I be making a mistake by using that end cap with a 1/2x28 to 5/8x24 adapter ?

 

[Brucebarker024]

I shoot a ton of rounds through my polo 30 with a 1/2x28 to 5/8x24 adapter. Thousands over the last year. 6.5 and 223.

 

[Tanner]

I shoot a ton of rounds through my polo 30 with a 1/2x28 to 5/8x24 adapter. Thousands over the last year. 6.5 and 223.

Just using the 5/8x24 adapter that it came with? Do you loctite it on?

 

[Brucebarker024]

Just using the 5/8x24 adapter that it came with? Do you loctite it on?

Yep, the one I bought came with the 5/8x24 direct mount. I used blue loctite for the adapter.

 

[9.3koolaid]

That looks like it would work.

Forgot to add that the Polo 30 also came with a 5/8x24 adapter/end cap already on it, from the factory. Would I be making a mistake by using that end cap with a 1/2x28 to 5/8x24 adapter ?

Should be fine, just simpler with the hub adapter I linked