Polaris atv mechanics on here??

Joined
Nov 28, 2022
Messages
749
Is there power at the spark plug wire? Have you checked the plug itself for continuity & resistance?
 

Mountneer

FNG
Joined
Feb 8, 2024
Messages
29
Location
SW Montana
If you truly have spark, service manual mostly points to fuel issues in troubleshooting ignition. My twin cylinder is hard to get at both plugs, but wonder if you can get it to fire with starting fluid sprayed into one cylinder?
 
OP
Jstumbaugh
Joined
Jan 12, 2021
Messages
830
Location
Upstate NY
If you truly have spark, service manual mostly points to fuel issues in troubleshooting ignition. My twin cylinder is hard to get at both plugs, but wonder if you can get it to fire with starting fluid sprayed into one cylinder?
Definitely no spark. Stator will land mid next week and I’ll swap that out.
 
OP
Jstumbaugh
Joined
Jan 12, 2021
Messages
830
Location
Upstate NY
Update....new stator in last night and still no spark. I've replaced the stator, cdi, rectifier and coil. I'm tracing grounds next. This thing isn't going to beat me.
 
OP
Jstumbaugh
Joined
Jan 12, 2021
Messages
830
Location
Upstate NY
Kill switch cuts power to everything. Tried disconnecting a "black wire" in the harness thats supposed to go to the kill switch and still no spark. Just read that there is a set of contacts in the throttle housing that might be touching causing no spark. I'll check that later today.
 
OP
Jstumbaugh
Joined
Jan 12, 2021
Messages
830
Location
Upstate NY
No luck on the “electronic throttle control” being in contact. Back to tracing grounds. I need to find a flow chart on sequence of ignition and meter readings to look for as well. Might be able to follow that and find an answer.
 
OP
Jstumbaugh
Joined
Jan 12, 2021
Messages
830
Location
Upstate NY
I haven’t. I had put it on the back burner. We had some camping trips planned out and got busy. I’ll get back to it and keep at it.
 
Joined
Apr 14, 2019
Messages
1,252
Location
Fort Myers , FL
Mine did that and turned out mice had eaten the insulation on a wire and it smoked as it shorted out.
I did not diagnose it my shop did so I don't have details.
 
Top