Please help - pocket DOPE card

[taewa]

Can anyone please help me with a couple load calculations? I am trying to prepare a sticker to put on my scope for hunting season to estimate yardage at each of the hash marks. I don't have a chronograph. I have the Viper HD 5-25 x 50 SFP scope VMR3-MOA reticle. My sight height is about 42mm (1.65in). I have a Seekins PH3 in 7PRC. I plan to hunt in Idaho around 3000-4500 ft. Zero at 100 yds. I am between two loads, so if you could send for each, that would be great. I did a ballistics calculator, but I don't know how to take that info and translate that over to my specific reticle.

1. Barnes 160gr LRX BT = 3050 fps
2. Federal Premium ELD-X 175gr = 3000 fps

Here's what I got from the Hornady site:
Bullet:HORNADY 7 MM 175 GR ELD-X
Muzzle Velocity (ft/s)3000
Wind Angle (°)90
Barrel Twist (in/rev)8
Altitude (ft)0
Bore Diameter (in)0.277
Pressure (inHg)29.92
Sight Height (in)1.65
Temperature (°F)59
Axial Form Factor1
Humidity (%)50
Zero Range (yd)100
Shooting Angle (°)0
Zero Angle (°)0.05333
Max Range (yd)500
Wind Speed (mph)10
Interval (yd)100
TRAJECTORYRESULTS

[th]

Range
(YDS)​

[/th]
[th]

Total Come Up
(IN)​

[/th]
[th]

Total Wind Drift
(IN)​

[/th]
[th]

No Wind Trajectory
(IN)​

[/th]
[th]

Wind Drift
(IN)​

[/th]
[th]

Gyro​

[/th]​

[td]0[/td][td]1.7[/td][td]0.0[/td][td]-1.7[/td][td]0.0[/td][td]1.77[/td] [td]100[/td][td]0.0[/td][td]0.4[/td][td]0.0[/td][td]-0.4[/td][td]1.89[/td] [td]200[/td][td]2.6[/td][td]1.6[/td][td]-2.6[/td][td]-1.8[/td][td]2.03[/td] [td]300[/td][td]9.9[/td][td]3.7[/td][td]-9.9[/td][td]-4.1[/td][td]2.19[/td] [td]400[/td][td]22.4[/td][td]6.8[/td][td]-22.4[/td][td]-7.4[/td][td]2.34[/td] [td]500[/td][td]40.7[/td][td]11.0[/td][td]-40.7[/td][td]-12.0[/td][td]2.50[/td]

Do you need any other info from me? Thanks so much!

 

[Antares]

 

[Koda_]

You need to know your velocity and confirm with practice at the distance you want to hunt. At this point youd be better off with a 200yd zero and keep your shots under 300yds max and youd be fine.