Pastrami Brine Kits

Joined
Feb 16, 2021
Messages
1,343
Location
Eastern Oregon
Anyone have a recommended brine kit for pastrami?

Alternatively, is it better to buy the individual ingredients and work by percentages? Never done a cured meat before so a little wary.
 

WRO

WKR
Joined
Nov 6, 2013
Messages
3,353
Location
Idaho
Super easy to do yourself..

fd293bfdc567cf66fe16daf770ab002b.jpg



Sent from my iPhone using Tapatalk
 

BigE

Lil-Rokslider
Joined
Apr 3, 2022
Messages
161
This is a Katz deli knockoff recipe, it is our family favorite. We typically smoke instead of steam but try what you like.

Pastrami Rub
Makes. A bit more than half a cup, enough for a whole beef brisket about 18 pounds with some leftover
Takes. 15 minutes.

Ingredients
2 tablespoons whole black peppercorns
2 tablespoons fresh coarsely ground black pepper
1 tablespoon whole coriander seeds
1 tablespoon coriander powder
1 tablespoon brown sugar
1 tablespoon paprika
2 teaspoons garlic powder
2 teaspoons onion powder
1/2 teaspoon whole mustard seeds
1/2 teaspoon mustard powder

Options. The paprika mostly adds color. If you want to veer from the conventional and amp it up a bit, substitute ancho powder or American chili powder, but be careful, the black pepper and mustard supply an ample kick. You can leave anything out that you want except the black pepper and the coriander.

Method
1) If you wish, you can use only powdered coriander, ground black pepper, and ground mustard, but I like using some whole seeds. If you are using some whole seeds, pour them into a zipper bag and smash them with the bottom of a sauce pan so they are "cracked" but not completely powdered.

2) Blend together all the spices. Rinse the meat, and while it is damp, apply the rub liberally, about 4 tablespoons per square foot of surface, and press it into the surface to help it adhere. If there is a thin part of meat, use less rub.

Pastrami
This homemade pastrami recipe is complex and smoky, but not in the way that other smoked meats are smoky. The smoke in this beef pastrami is not overt. It is blended in thoroughly. Much like Katz's pastrami, this is highly seasoned, but the black pepper and coriander rub is never domineering, and swimming across all your buds are a range of other herbs and spices.

Makes. About 3 pounds of pastrami after shrinkage, enough for 4 good sandwiches after trimming

Cooking time. 6 hours approximately to smoke a thick 4 pound chunk at 225°F. Actual cooking time depends on thickness not weight.

Then it goes into the fridge about 12 hours, and then it steams for about 2 hours. Larger and thicker cuts will take longer.

Ingredients
4 pounds of good corned beef (home made)
*the flat section of the brisket is favored by many because it makes nice even slices for sandwiches, but I prefer the point section of the brisket because it is fattier, richer, and more tender. It can also be made from flank steak, or leaner cuts, or even from boneless short plate (rib meat).

3 tablespoons pastrami rub

Method

1) Prep the corned beef, the process takes about a week. (See corned beef recipe). If you are using brisket, one side of the meat will probably have a thick layer of fat on it called the cap. Remove all of the fat cap except about 1/8" and if there is any filmy membrane on the other side, remove it all. That thin layer of fat is important.

2) Desalinate. Put the corned beef in cold water in the fridge for at least 8 hours. This removes excess salt.

3) Rub. Make the rub. Rinse the meat, and while it is damp, apply the rub liberally, about 4 tablespoons per square foot of surface, and press it into the surface to help it adhere. If there is a thin part of meat, use less rub.

Put in the fridge for a minimum of 2 days. Don't wrap it. The rub just sticks to the plastic wrap. Normally I say you do not need to let meats marinate in a rub, but the wait seems to help this particular rub adhere.

4) Fire up. Set up your grill in 2 zones for smoking or set up your smoker. If you can, use a charcoal smoker. It produces a deeper darker crust than any other cooker. Preheat to 225°F. Pick your wood. I don't think it makes a huge difference with all the other flavors banging around in there. My best batch was with cherry wood.

5) Cook. Place the meat on the smoker or on the indirect heat side of the grill. If you plan to steam it before serving for maximum tenderness, you only need to smoke it with indirect heat until it reaches the stall at about 150°F. You can wrap in foil and refrigerate for a week if you wish or proceed to the steaming step. The downside is that steam softens the crust. You can skip the steaming and smoke it up to 203°F and have a nice firm smoky bark, but the meat will not be quite as tender. But it will be tender. And delicious. Your call. Try it both ways and pick the method that suits you best.

6) Steam (optional). If you want to steam it for maximum tenderness, if you have a bamboo or metal steamer in which the meat will fit, you can use that. If not, you can make a steamer by putting a wire rack in a baking pan. If necessary you can sit the rack on wads of foil to keep it out of the water. Unwrap the meat and put it on the foil in which it was wrapped or the steam will wash off much of the rub. Do not slice the meat first.

a) If you made a steamer with a baking pan, cover it with foil. If the pan is steel don't let the foil touch the meat. The salt, the water, the steel, and the aluminum can interact and create electrical charges that can melt the foil!

b) Put the pan on a burner, turn the heat to medium low, and steam it an hour or two until heated through to 203°F. Add hot water as needed, making sure the pan never dries out. Don't rush this. Take it all the way to 203°F. Note that the crust tends to get soft when you steam. No doubt about it, a hard crust is more appealing. So you can firm the crust by putting it on a hot grill or in the oven or under the broiler for a few minutes. The best crust comes from smoking up to 203°F and skipping the steam.
 

chizelhead

Lil-Rokslider
Joined
Mar 12, 2012
Messages
275
Location
PNW
I just did a beef brisket recently.
  • I surveyed a bunch of methods and gravitated towards the Katz version which many people try to emulate. I also referenced the AmazingRibs method to make it into corned beef first and there's a link for pastrami. There's a calculator on how long to brine on the amazing ribs site. It said 30 days (Katz method) for my 12 lb brisket. I couldn't wait after 2 weeks, and it turned out great. It had nice even brining of which more brining wouldn't have helped. I also left a thin fat cap on the flat, and more around the point, which most recipes recommend removing as much fat as possible since they believe it interferes with brining. I didn't find that to be the case, and the fat was nice for the pastrami for smoking and eating. I also saw where some people separate the point from the flat and divide it into two parts. This was done because they removed all the fat. Also, it speeds up brining. I'm not sure that's necessary.
  • You can use pickling spice if you want to skip the brine recipe. Don't forget the Prague Powder #1. Do not use Prague powder #2. They are not interchangeable. And more isn't better.
  • I like whole seed spices versus ground for brining and rub.
  • Desalinating is important. Water works well for this overnight.
  • When smoking, you can crutch if after the stall and skip the steaming. I haven't tried steaming, so I'm not sure if just crutching is better.
  • For the smoke, I used oak, but hickory would be good. A local deli uses hickory and it tastes great. I will likely try it next time.
  • I've done this on beef and mountain goat to great success. The biggest challenge was waiting for the brining to finish.
  • I approached this like most things when I try something new. I figure just go for it, I'll most likely mess it up the first time, but that's the cost of learning. This wasn't that hard. Have fun. Let us know how it turns out.

IMG_2106.jpeg
 

Attachments

  • IMG_2105.jpeg
    IMG_2105.jpeg
    358.8 KB · Views: 7
Last edited:
Joined
Jul 27, 2021
Messages
1,594
I make my own pretty much like WRO posted never done the ginger ale soak but might give it a try, wonder how a good quality ginger beer would work.
 

WRO

WKR
Joined
Nov 6, 2013
Messages
3,353
Location
Idaho
I make my own pretty much like WRO posted never done the ginger ale soak but might give it a try, wonder how a good quality ginger beer would work.

It gives it a sweet tangy finish, I really like it.


Sent from my iPhone using Tapatalk
 
Joined
Dec 1, 2023
Messages
11
Look up Emerils duck pastrami recipe, and just substitute critters, and cheap gin for the juniper berries. I make it with geese all the time.
 
OP
SteveAndTheCrigBoys
Joined
Feb 16, 2021
Messages
1,343
Location
Eastern Oregon
@fwafwow - your post reminded me that I never updated this. I did a combo between the Katz recipe here, the Meateater recipe for brine time and the ginger ale soak. Only did the smoker with a butcher paper wrap, no steaming. Turned out great. Biggest mistake was taking it into work and offering sandwiches to my coworkers.

1716867964536.png

1716868081545.jpeg
 

strousek

WKR
Joined
Sep 28, 2017
Messages
336
Location
Colorado
We do all of our goose breast this way. Never will I eat geese any other way again. Also never given a piece to anyone that didn't beg for the recipe and argue with me that they weren't eating goose.

Goose Pastrami
Brine:
1 ½ cup water
¾ cup salt
¾ cup brown sugar
2 tablespoon minced garlic
2 tablespoon pickling spice
1 oz. package pink cure salt

Bring water to boil. Add all ingredients and stir continuously until salt and sugar are dissolved. Simmer 5 minutes. Let cool.
Place 10 cleaned goose breast in a non-reactive container. Cover with brine and set in fridge for 48-72 hours. Add cold water if needed to ensure all breast are fully submerged in brine.
Remove from fridge and rinse goose breast in cold water.

Rub:
3 tablespoon ground black pepper
2 tablespoon ground coriander
2 teaspoon onion powder
1 teaspoon garlic powder
1 teaspoon ground clove
1 teaspoon paprika
½ teaspoon nutmeg

Cover all sides of goose breast with rub. Reserve excess rub that falls off breast for later. Place breast in a pellet smoker at 210 degrees (roughly 2 hours) until internal temperature reaches 120 degrees. Add excess rub to 1 cup of water in an aluminum pan. Add goose breast to pan and cover with foil. Smoke an additional ½ to 1 hour until internal temperature reaches 160 degrees. Remove from smoker and place pan in fridge overnight. Slice thin with meat slicer. Eat as much as you can before your kids eat it all.
 

Trogon

WKR
Joined
Feb 17, 2015
Messages
1,300
Location
CO
If you want to get the pink "corned" look, you need instacure #1 (aka prague prowder). Many recipes seem to be afraid of curing salt. Nitrates = cancer (Im told)

I agree with others that the desalination part is important. Will be insanely salty otherwise. Its also useful to make a double batch and have some ready to go for next time.
 
Top