Painless load development (mine)

[Castle Rock]

Over hunting distances as long as you are truing it probably doesn’t matter, however the ballistic aps make it easier to use the velocity solution.
It’s also far more common to get accurate BCs now than in the past.

 

[Formidilosus]

Yeah, I have a Garmin, and this is exactly the point where I've gotten confused. I've heard both before - true the velocity vs true the bc. I could never understand truing the velocity when I have actual hard data from my rifle, whereas BCs are published and I've heard on more than one occasion inflated.

Legit BC’s are available for most bullets. The BC variation from rifle to rifle is small: 10-15 G1 points at most (I’ve never seen more than 10 that I can remember over Doppler). Look at what a different between .6 G1 and .590 G1 at 800 yards is with same MV.

The amount of people that have the skill and ability to see the difference in real BC between rifles at even 800 yards is laughably small, and anyone (including me) that has to ask or wonder are absolutely not them.

The biggest source of error with each shot is MV. That is why it is adjust first. And, when adjusting MV from the muzzle to the distance where trued, it will backwards line up all points and absorbe any error in zero offset, scope increment click value, etc- better than adjusting BC.

 

[Alpha Echo]

Thank you for the detailed explanation Form!

 

[Chet707]

Follow up post after truing at 550.

Ended up with a trued velocity of 2850 with 77 tmk and 24 gr varget. Shooting over a buddies garmin had a discrepancy of 90 fps slower than my trued velocity. I kept my own velocity and just went 3 for 3 at 871 and 525. Good enough for me!

 

[NoDakhunter]

Legit BC’s are available for most bullets. The BC variation from rifle to rifle is small: 10-15 G1 points at most (I’ve never seen more than 10 that I can remember over Doppler). Look at what a different between .6 G1 and .590 G1 at 800 yards is with same MV.

The amount of people that have the skill and ability to see the difference in real BC between rifles at even 800 yards is laughably small, and anyone (including me) that has to ask or wonder are absolutely not them.

The biggest source of error with each shot is MV. That is why it is adjust first. And, when adjusting MV from the muzzle to the distance where trued, it will backwards line up all points and absorbe any error in zero offset, scope increment click value, etc- better than adjusting BC.

I trued my 22cm with 75 eldms out to 655yds a few weeks ago using my revics . Hornady lists a G7 of .235 and mine trued at .196. I have a known MV with 30ish shots down the garmin and have an accurate scope height measurement. Thoughts?

 

[Formidilosus]

I trued my 22cm with 75 eldms out to 655yds a few weeks ago using my revics . Hornady lists a G7 of .235 and mine trued at .196. I have a known MV with 30ish shots down the garmin and have an accurate scope height measurement. Thoughts?

Yes. Something is off. Zero is slightly off, crosswind or up/down drafts, etc.

 

[NoDakhunter]

Zero was checked at 100 yards in same session with 10 shot group. Shooting in flat ground. Reading on multiple things here I’m also puzzled. Had a ~6 mph wind coming from 5 o’clock. Will recheck next week.

 

[Castle Rock]

Check the simple things first, how good is the rangefinder, is it set to yards or metres

 

[wind gypsy]

I trued my 22cm with 75 eldms out to 655yds a few weeks ago using my revics . Hornady lists a G7 of .235 and mine trued at .196. I have a known MV with 30ish shots down the garmin and have an accurate scope height measurement. Thoughts?

How have you validated scope tracking?

Aerodynamic jump is a possible partial contributor if you had a decent wind from the right on a right hand twist barrel but i wouldn't expect 6mph from 5 o'clock to have much effect and it would actually make you hit higher rather than lower.

Up/down drafts can still be a thing in pretty dang flat conditions over 600+ yards.

 

[NoDakhunter]

Have not validated tracking other than increasing elevation hold when truing or when zeroing. Scope is an NX8. I’ve killed coyotes out to 505 with it using Hornady BC but when playing with calc the change in BC is only 3ish inches elevation at that distance.

 

[wind gypsy]

Follow up post after truing at 550.

Ended up with a trued velocity of 2850 with 77 tmk and 24 gr varget. Shooting over a buddies garmin had a discrepancy of 90 fps slower than my trued velocity. I kept my own velocity and just went 3 for 3 at 871 and 525. Good enough for me!

Does your calculation have a wind entered, from which direction, and does the calc account for aerodynamic jump?

 

[DLB]

Are you... me... circa 2019 and prior? I'm having flashbacks....

God I sure do not miss that nonsense. I wasted so much money and so much time chasing stuff that plain simply is not a factor.

The reality is I'm not a good enough shooter to notice 0.3 grain powder variations. I miss because I'm a shitty shot. Full Stop. Throw in field conditions and shooting off not-a-bench and, well...

I'm humble enough to know that I am the weak-link in all of this. 0.3 of a grain doesn't change that. ES doesn't change that. Attempting to shoot the challenge here really messed with a lot of preconceptions I had, and got me off the Ballistics Masturbation train.

This was my harsh reality. Once I started working on becoming a better shooter, my groups go smaller.

 

[Chet707]

Does your calculation have a wind entered, from which direction, and does the calc account for aerodynamic jump?

Sorry, for the late response. Didn't have notifications on for this thread.

So I ended up shooting some more and using the garmin velocities for the last batch of tmks i had loaded. I don't recall having a wind value plugged in and im using a very basic free calculator so Im doubtful that it is accounting for aerodynamic jump.

The target at 800+ is approx 24x24" and the 500 yard is a 10" plate. So i very well could have just got lucky even with the discrepancy in velocity on those targets. The hits if i remember correctly weren't exactly centered.

Using the garmin velocities, I was consistently hitting everything in my normal practice range 200ish to 500ish yds.

 

[nm.otter]

Apologies for the interruption, but I'm hoping someone here with a set of Hornady Custom Grade 6.5mm CM dies might be able to help.

thank you~

 

[Hardly_Hangin]

Ive never reloaded before, but this thread inspired me to jump in. Id been eyeballing it for a couple of years but was too intimidated to commit. I bought a Lee loading kit, pressure tested 6 rounds from book min up in 0.5gr jumps, no pressure signs. Loaded a batch of 10 77tmks over 8208 in my 16"ar.

Groovy baby

 

[Alpha Echo]

Ive never reloaded before, but this thread inspired me to jump in. Id been eyeballing it for a couple of years but was too intimidated to commit. I bought a Lee loading kit, pressure tested 6 rounds from book min up in 0.5gr jumps, no pressure signs. Loaded a batch of 10 77tmks over 8208 in my 16"ar.

Groovy baby
View attachment 984090

Welcome to the party!

 

[Hardly_Hangin]

How many reloads are you guys getting out of 223 or 6arc brass? No trimming

 

[Alpha Echo]

I bought 500 pcs of starline and still in my first reload, so unfortunately I can't help.

 

[DadWil]

How many reloads are you guys getting out of 223 or 6arc brass? No trimming

I've finally retired some Lake City brass due to loose primer pockets after ~ 15 spicy reloads... cannot answer the trimming portion all my brass goes thru the trim process needed or not

 

[Alpha Echo]

I've finally retired some Lake City brass due to loose primer pockets after ~ 15 spicy reloads... cannot answer the trimming portion all my brass goes thru the trim process needed or not

How often did you need to trim the LC brass? I'm assuming you only trimmed when it was over trim length spec?