Outdoorsmans Head + Peak Design Clip

[oregonsteelheader]

Has any one figured out a way to use an Outdoorsmans Pan Head for camera work while also using a Peak Design Capture Pro plate? Looking for a way to seamlessly transfer camera from Peak Design shoulder clip to Outdoorsmans Pan Head, and spotting scope/binoculars to Outdoorsmans Pan head, without changing plates.

Thanks.

 

[Outdoorsmans]

Put one of our Quick Release Adapters on the Peak plate.

Thank you!

 

[oregonsteelheader]

Put one of our Quick Release Adapters on the Peak plate.

Thank you!

That could work, it would mean the camera would be sitting almost 1.5" off the peak clip, I would need to mount not only the quick release adapter to the peak plate but also your 1/4-20 Adapter Plate to the camera. Not ideal, any other solutions?

 

[bowhnter7]

Yup.

I took the top half of the Peak Clip, flipped it over and milled it flat.
Then drilled and tapped a hole to mount the plate to.
Attached the plate, then attached to the head. Now I can clip in a camera, binos, or spotter all with the Peak design plate.

 

[oregonsteelheader]

Yup.

I took the top half of the Peak Clip, flipped it over and milled it flat.
Then drilled and tapped a hole to mount the plate to.
Attached the plate, then attached to the head. Now I can clip in a camera, binos, or spotter all with the Peak design plate.

Do you have any photos you can share?

 

[bowhnter7]

Once I get back at home today I'll take some.

 

[dreamingWest]

I'd like to see that as well.

My plan was to attach one of these to the Outdoorsman Adapter Plate:

Amazon.com : Skeleton Clamp Desmond DAC-X1 50mm QR Lightweight w Bubble Level 3/8" w 1/4" Adapter Arca Compatible for Tripod Head : Arca Swiss Clamp : Camera & Photo

 

[bowhnter7]

I'd like to see that as well.

My plan was to attach one of these to the Outdoorsman Adapter Plate:

Amazon.com : Skeleton Clamp Desmond DAC-X1 50mm QR Lightweight w Bubble Level 3/8" w 1/4" Adapter Arca Compatible for Tripod Head : Arca Swiss Clamp : Camera & Photo

Sent from my iPhone using Tapatalk

 

[bowhnter7]

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

 

[bowhnter7]

Benro S2 head and plate but you could do the same with the Outdoorsman plate.


Sent from my iPhone using Tapatalk

 

[mlevimadden]

Following along. I have been trying to find a solution as well, but haven't had a breakthrough yet. I love the Outdoorsman heads, and they make a great product. But it is beyond lame that they only use their proprietary foot.