Outdoorsman Tripod and Heads

USMC22

WKR
Joined
May 9, 2019
Messages
850
Location
New Hampshire
Can anyone weigh in on how the outdoorsman tripod and camera head compare to SLIK 624/824 CF Pro Tripods and Manfrotto Tripods and Heads. I’m looking to get a setup for running Binos. I’ve got SLIK tripod(s) already.

Mainly looking for a fluid head. If the outdoorsman setup is where it’s at I’ll pick that up or add a Manfrotto 128RC to my setup.
 

Napperm4

WKR
Joined
Dec 31, 2016
Messages
444
Location
Calgary, AB, Canada
In my experience - I prefer carbon over aluminum. Outdoorsmans tripods are tough and steady sure, but there’s a lot of options out there that offer the same. I ditched the compact medium in favour of my slik 634 and have no regrets.

I still have the regular pan head, I like that it has the quick mount system and I can easily flip it between a couple tripods and the window mount. It’s nice to be easily compatible with the bino mount also.

It locks down pretty decent with my 95mm swaro.

That’s where the advantages really stop for me. It’s not a fluid head per se. While it’s pretty smooth when wide open with the binos there’s no real way to feather the lock. It’s either open and free moving, jerky and annoying or locked.

While it does lock down pretty good there are very few benefits I’ve seen to the vanguard p111 and the benro S2 that I’ve used previously. If you’re looking for a fluid head for video or better panning (my biggest use) I’d save the money and go a different route if I was to do it again.

I’ve been pretty tempted by the surui v5 (I think is the model) that’s being touted these days all over the place.
 
Joined
May 29, 2012
Messages
3,474
Location
Lewiston ID
I have the same feelings on the outdoorsmans as the poster above. They lock down solid and are smooth when wide open, but a controlled smooth panning motion is very hard to achieve.

I’ll be shopping for a new pan head here before scouting season comes up. I’ve used the medium outdoorsmans tripod and it’s rock solid. Though a bit heavy for my needs. Used a slik and then a Sirui tripod the last 3 seasons and it was fantastic. It had a fatal encounter with a truck tire so I replaced it with a field optics research tripod and I saved 4 oz and it’s working great so far. Doubt I’ll upgrade or see a need the next few years.

Mike


Sent from my iPhone using Tapatalk
 
Joined
Jan 13, 2017
Messages
1,497
The best bet's would be the Promaster XC525C on special for $199.99, regularly $299.99. Carbon Fiber, 9 layers of carbon, great ball head and for members here a lifetime no fault warranty. Also the Sirui N1204SKVA5, very sturdy and it comes with the VA5 head that everyone loves. Normally This is $494.99, members pay $429.99 and then get $100 back from Sirui

Feel free to call me
 
Last edited:
OP
U

USMC22

WKR
Joined
May 9, 2019
Messages
850
Location
New Hampshire
Leaning toward the VA5, anyone else want to weigh in for it or something else? Any Manfrotto 200pl setups?
 

Salmon River Solutions

WKR
Rokslide Sponsor
Joined
Jul 5, 2018
Messages
1,187
Location
North Idaho
I just picked a used VA-5 up, I'll use it this weekend bear hunting. its called "compact" but its only compact when you compare it to very large video camera pan heads. Weight isn't too bad tho. I just used an outdoorsmans panner last weekend so I will post back up here the comparison after this next weekend.
 
Joined
Jan 13, 2017
Messages
1,497
The VA5 is a great head and starting today we are giving 20% off on all Sirui heads and tripods. I will be posting promotion shortly
Normally it's $164.99, with the discount it would be $131.99

It's lightweight and extremely well built. Arca Swiss as well

Give me a call
 

1shotgear

WKR
Rokslide Sponsor
Joined
Jun 8, 2015
Messages
1,256
Location
Denver, CO
View attachment 100477
What’s it weigh? And can it double up as a rifle rest with a 10.5 lb rifle?
View attachment 100480
Sent from my iPhone using Tapatalk
It is a little on the heavy side for some coming in at a pound but the bearings are smooth as glass and the head is holds up to 10.5 pounds. I do us this as a rifle rest as well working in pair with my Sirui ET-2204 Carbon Fiber Tripod it works really well for me. I would say that it will hold a 10 pound rifle just fine depending on the tripod but with this set up it is rock solid. Here is how I orientate it for the standing. The tripod is not put up all the way but you guys and girls get the idea. 100483

100486
 

Attachments

  • image1.jpeg
    image1.jpeg
    315.2 KB · Views: 31
Joined
May 29, 2012
Messages
3,474
Location
Lewiston ID
View attachment 100477
It is a little on the heavy side for some coming in at a pound but the bearings are smooth as glass and the head is holds up to 10.5 pounds. I do us this as a rifle rest as well working in pair with my Sirui ET-2204 Carbon Fiber Tripod it works really well for me. I would say that it will hold a 10 pound rifle just fine depending on the tripod but with this set up it is rock solid. Here is how I orientate it for the standing. The tripod is not put up all the way but you guys and girls get the idea.

Is it 16 oz with the base plate? a flat lb is not heavy in my book. When you're getting close to 1.5 lbs it's getting up there but 16-24 oz for head/baseplate is very doable for me. Thanks

Mike
 

Tberg

Lil-Rokslider
Joined
Apr 26, 2016
Messages
158
Location
Arizona
View attachment 100477
It is a little on the heavy side for some coming in at a pound but the bearings are smooth as glass and the head is holds up to 10.5 pounds. I do us this as a rifle rest as well working in pair with my Sirui ET-2204 Carbon Fiber Tripod it works really well for me. I would say that it will hold a 10 pound rifle just fine depending on the tripod but with this set up it is rock solid. Here is how I orientate it for the standing. The tripod is not put up all the way but you guys and girls get the idea. View attachment 100483

View attachment 100486
Would you recommend the VA5 for use as a rest with a 8# rifle and a shooting saddle like the Triclawpse solo? https://triclawps.com/products/triclawps-solo-saddle
 
Joined
Jan 10, 2014
Messages
611
The best bet's would be the Promaster XC525C on special for $199.99, regularly $299.99. Carbon Fiber, 9 layers of carbon, great ball head and for members here a lifetime no fault warranty. Also the Sirui N1204SKVA5, very sturdy and it comes with the VA5 head that everyone loves. Normally This is $494.99, members pay $429.99 and then get $100 back from Sirui

Feel free to call me

I'm potentially interested in this combo...I looked it up on camerlandny.com but I don't see anything about the $100 back from Sirui. How would one take advantage of that if one were to purchase this?
 
Joined
Jan 13, 2017
Messages
1,497
Actually with the sale we have now thru Saturday that tripod with the VA5 is $399.99 and then you get the $100 back

Call us to order, not available on our site
 
Top