OG Suppressor Early Access Rokslide Link

[BAKPAKR]

I’m putting mine on a 16” 7mm BC

Why are you going so long?

 

[Formidilosus]

What are the cartridge/barrel length restrictions? I don’t see those listed in the description or specs.

I believe that their stated is 22” or longer 30cal magnums. 6.5prc’s and lower, 16”.


But, that’s really more of useful lengths- there has been no damage with 20” 300wm and 7prc’s, nor 20” 300 RUM’s.

 

[BAKPAKR]

I believe that their stated is 22” or longer 30cal magnums. 6.5prc’s and lower, 16”.


But, that’s really more of useful lengths- there has been no damage with 20” 300wm and 7prc’s, nor 20” 300 RUM’s.

Thanks. I am planning on getting a lefty Tikka 7mm PRC one of these days. So, there should be no worries with the 22” barrel on it.

 

[khuber84]

Please send one to TBAC suppressor symposium, silencer summit, whatever they call it so we can see how this thing stacks up against competitors!

 

[Unknown Suppressors]

To everyone who has ordered an OG, we have them in stock and as soon as we hear back from your FFL/SOT with the information we need we will be shipping them out! Ignore the print date that it gives you when you place your order. That is us being conservative and giving ourselves some breathing room on getting them shipped out! If your FFL gets back to us quick, we will get it shipped out quick!

 

[Unknown Suppressors]

Please send one to TBAC suppressor symposium, silencer summit, whatever they call it so we can see how this thing stacks up against competitors!

Silencer Summit, if we can figure out how to get a can sent to them we will definitely be doing this!

 

[Gabe69]

To everyone who has ordered an OG, we have them in stock and as soon as we hear back from your FFL/SOT with the information we need we will be shipping them out! Ignore the print date that it gives you when you place your order. That is us being conservative and giving ourselves some breathing room on getting them shipped out! If your FFL gets back to us quick, we will get it shipped out quick!

kinda rushed the sot spot. Will you guys contact us if you need more info or should we be forward and send helpful info? Thx

 

[Sundodger]

I believe that their stated is 22” or longer 30cal magnums. 6.5prc’s and lower, 16”.


But, that’s really more of useful lengths- there has been no damage with 20” 300wm and 7prc’s, nor 20” 300 RUM’s.

What is the barrel length restriction on 300 blackout? I was hoping to put one on an AR pistol for blacktail hunting.

 

[benconfused]

To everyone who has ordered an OG, we have them in stock and as soon as we hear back from your FFL/SOT with the information we need we will be shipping them out! Ignore the print date that it gives you when you place your order. That is us being conservative and giving ourselves some breathing room on getting them shipped out! If your FFL gets back to us quick, we will get it shipped out quick!

Do you guys know how long you'll have this particular order run open before closing it to do the OGL's?

 

[Unknown Suppressors]

kinda rushed the sot spot. Will you guys contact us if you need more info or should we be forward and send helpful info? Thx

We really just need an email and phone number for your FFL/SOT and we will reach out to them!

 

[Unknown Suppressors]

What is the barrel length restriction on 300 blackout? I was hoping to put one on an AR pistol for blacktail hunting.

No barrel restrictions for 300 blackout.

 

[Unknown Suppressors]

Do you guys know how long you'll have this particular order run open before closing it to do the OGL's?

As of right now we will not be closing orders to work on the OGLs, we are making a bunch of OGL prototypes right now. Hopefully the design is done quickly, should release soon after!

 

[Presswood_936]

We really just need an email and phone number for your FFL/SOT and we will reach out to them!

Can we email sales@uknown with that info ?

 

[bpitcher]

Can we email sales@uknown with that info ?

That is what I did on Friday. Not sure if it went to the right place or not...

 

[Owen@Shoot2Hunt]

Can we email sales@uknown with that info ?

Best spot to get that info to is [email protected]. There is also the contact form which goes to the same email. If you send to [email protected] it may not get where it needs to be.

 

[Kaleb]

We really just need an email and phone number for your FFL/SOT and we will reach out to them!

I replied to my confirmation email with that information. If I need to do anything else I’m happy to. I’m not in a hurry but sure don’t want a hold up because I didn’t provide the information correctly.

 

[waldo9190]

Sorry if its been asked already, but is there a comparison anywhere on the "raw" surface finish vs the best blast? Curious if the raw finish is more or less coarse than the bead blast.

 

[SteveAndTheCrigBoys]

I put FFL name, address and license number in order notes then license number again in the SOT info box. Talked to my FFL before ordering and sent him an email that I had purchased. He told me he got an email from US yesterday and replied with the necessary info.

Pretty easy so far!

 

[Scottyboy]

Sorry if it’s been asked already, but is there a comparison anywhere on the "raw" surface finish vs the best blast? Curious if the raw finish is more or less coarse than the bead blast.

I was curious about this as well, i have a raw on order and i will let you know as soon as i see it (look-touch it I should say) which im hoping is in a few days

 

[JM151]

I’m waiting for OTB on carbon barrel with muzzle brake at end.