Official Rokslide Group Buy - Unknown Suppressors OG-6S (CLOSED)

[TNHighlands]

What's everyone seeing once suppressors hit SOT?
My form 4 was submitted 5 or so days ago... did anyone not receive the acceptance email?

Previous 3 suppressors all cleared in 24-36hrs. I'm not impatient but read some people weren't getting notified as to acceptance. I believe i was notified on all of my other cans so just curious what this groups seeing once these hit SOTs.

When logging into the eform portal, the submission does not show up.

 

[wyosam]

What's everyone seeing once suppressors hit SOT?
My form 4 was submitted 5 or so days ago... did anyone not receive the acceptance email?

Previous 3 suppressors all cleared in 24-36hrs. I'm not impatient but read some people weren't getting notified as to acceptance. I believe i was notified on all of my other cans so just curious what this groups seeing once these hit SOTs.

When logging into the eform portal, the submission does not show up.

Think I was 8 days on this one.


Sent from my iPhone using Tapatalk

 

[B_Reynolds_AK]

Ok everyone, this is coming to a close. Everyone that has messaged me with their info has had their details forwarded to Unknown. We sold somewhere in the vicinity of 180 suppressors.
US will reach out to those that they havn't already to shortly, as they run down the list in order received.

 

[Dude270]

Copy that. A 22 CM with the 69. ELD-VT would be absolutely lethal, and fast, for coyotes.

Im sure the 69 and 62 eld-vt are better options these days. I use 75 eld-ms for this application. Used to do it with a 22-250 AI at just shy of 3400 fps. 3300 is where my 20" 22 creed like to be. They are fantastic for a pretty flat predator bullet that still hangs in there in the wind or at distance.

 

[Bluefish]

What's everyone seeing once suppressors hit SOT?
My form 4 was submitted 5 or so days ago... did anyone not receive the acceptance email?

Previous 3 suppressors all cleared in 24-36hrs. I'm not impatient but read some people weren't getting notified as to acceptance. I believe i was notified on all of my other cans so just curious what this groups seeing once these hit SOTs.

When logging into the eform portal, the submission does not show up.

I have been seeing about a month on trusts recently and individuals up to 2 weeks. I am 2 weeks into a trust, no approval yet.

The submissions and approval won’t show on your portal. The dealer submitted the form 4 and it only shows on his portal. Your portal only shows form 1,4,5 that you initiate.

 

[bpitcher]

Ok everyone, this is coming to a close. Everyone that has messaged me with their info has had their details forwarded to Unknown. We sold somewhere in the vicinity of 180 suppressors.
US will reach out to those that they havn't already to shortly, as they run down the list in order received.

You the man!

Thank you again for putting this together.

 

[GJ12]

Im sure the 69 and 62 eld-vt are better options these days. I use 75 eld-ms for this application. Used to do it with a 22-250 AI at just shy of 3400 fps. 3300 is where my 20" 22 creed like to be. They are fantastic for a pretty flat predator bullet that still hangs in there in the wind or at distance.

We had pretty bad luck out of the 62 eld-vt in 22 ARC AR platforms. 69 eld-vt and 75 eldm seems to anchor coyotes better.

 

[Cory_Shoot2Hunt]

We had pretty bad luck out of the 62 eld-vt in 22 ARC AR platforms. 69 eld-vt and 75 eldm seems to anchor coyotes better.

I’m wanting to do a 18in 22cm with the og6-s shooting 80gr eldm since they’ll work good on wolves, cougars, deer, etc as well if needed but mostly coyotes and will be going a lot faster than my 108’s…

 

[littlebigtine]

Got to shoot mine this weekend on an 18" 6 creed. I was comparing it to a 223 with a tbac ultra 7 and it was hard to tell enough difference to talk about. I know some are going shorter but it got me excited enough to order a 21" barrel to do a 22 creed on with the thought that I can add 3" of barrel and pick up some speed while still being as short as I am used to (18" barrel with 6" muzzle forward suppressor)

It inspired me to build a 16” 22 creed, might put it in a folder and see how short I can get it. . By my math I should be able to be lethal with 88 eldms out to 600 yards

 

[Cory_Shoot2Hunt]

It inspired me to build a 16” 22 creed, might put it in a folder and see how short I can get it. . By my math I should be able to be lethal with 88 eldms out to 600 yards

And if those don’t shoot you can always run 80’s or the 88 tmk. Lots of good options in that range

 

[Scottyboy]

Probably a 22cm and a 6UM. I have a 6cm now I chopped down to 16in and it’s just a little shorter than I’d like so kind of a turd lol

Post it in the classifieds, sounds like a turd that I need!

 

[kkp005]

Picked mine up today . Paperwork was submitted on Friday (4/24) as an individual and approved this morning (4/29)

Man this thing is light and absolutely perfect on my 16” 6cm. Shot it next to a enticer sti and Jolene S… didn’t sound any louder to me..

One small gripe.. Mine was absolutely filled with metal shavings in it and all in the threads. Didn’t seem like it even got blown or shook out.

 

[IrkedCitizen]

Form 4 started today. Trust. At Murdochs

 

[mattminative]

Ok everyone, this is coming to a close. Everyone that has messaged me with their info has had their details forwarded to Unknown. We sold somewhere in the vicinity of 180 suppressors.
US will reach out to those that they havn't already to shortly, as they run down the list in order received.

Thanks for putting this together!


Sent from my iPhone using Tapatalk

 

[Brix8984]

Ok everyone, this is coming to a close. Everyone that has messaged me with their info has had their details forwarded to Unknown. We sold somewhere in the vicinity of 180 suppressors.
US will reach out to those that they havn't already to shortly, as they run down the list in order received.

Yes thanks again! Now on to the og22 group by?

 

[Escalante11]

Picked mine up today . Paperwork was submitted on Friday (4/24) as an individual and approved this morning (4/29)

Man this thing is light and absolutely perfect on my 16” 6cm. Shot it next to a enticer sti and Jolene S… didn’t sound any louder to me..

One small gripe.. Mine was absolutely filled with metal shavings in it and all in the threads. Didn’t seem like it even got blown or shook out.

Same here.. I was worried about my barrel threads so backed it back off and cleaned out the threads the best I could.

Not a huge deal and can seems nice otherwise. Looking forward to putting some rounds down it this weekend.

 

[coya]

Yes thanks again! Now on to the og22 group by?

Take my money

 

[wind gypsy]

One small gripe.. Mine was absolutely filled with metal shavings in it and all in the threads. Didn’t seem like it even got blown or shook out.

Same here.. I was worried about my barrel threads so backed it back off and cleaned out the threads the best I could.

Not a huge deal and can seems nice otherwise. Looking forward to putting some rounds down it this weekend.

Yeah, i'm going to be real careful on this going forward with 3d printed cans. Dont want to be putting bullets down bores that are covered in Ti dust.

At a minimum flushing them before shooting. If the DT threads aren't even clean that seems to be a pretty good sign.

Barrel damage likelihood from titanium powder?

Looking for some insight. If someone were to “theoretically” fire 13 rounds of .338 lapua through an MRAD barrel that had unknowingly become fouled with a significant amount (think a teaspoon or more, deposited/recirculated throughout the string of fire) of what I’m assuming is titanium powder...

www.snipershide.com

 

[waspocrew]

Yeah, i'm going to be real careful on this going forward with 3d printed cans. Dont want to be putting bullets down bores that are covered in Ti dust.

At a minimum flushing them before shooting. If the DT threads aren't even clean that seems to be a pretty good sign.

Barrel damage likelihood from titanium powder?

Looking for some insight. If someone were to “theoretically” fire 13 rounds of .338 lapua through an MRAD barrel that had unknowingly become fouled with a significant amount (think a teaspoon or more, deposited/recirculated throughout the string of fire) of what I’m assuming is titanium powder...

www.snipershide.com

What’s the best way to go about cleaning out the shavings? Air compressor or brush?

 

[HuntHarder]

Fwiw, all my 3d printed cans have had a bunch of titanium dust in them. The ZG7 probably being the worst. I just make sure the threads are clean, screw them on and fire a bunch of shots thru them. Seems to clean them out pretty quick.