Official Rokslide Group Buy - Unknown Suppressors OG-6S (CLOSED)

[Brix8984]

I’m in for a 5/8-24 og22. Just got my og-6s but haven’t had a chance to shoot it yet. I have a raptor 10 5.56 with 4” reflex on order too. My understanding is they are good for up to 6mm. Waiting on it since it’s kind of a one off because I wanted the direct thread and reflex for a 5/8-24 barrel as well.

 

[nm.otter]

My .223 RSS is threaded 1/2-28. It'd be cool to see a special run of OG22 with the smaller threads so I don't have to mess with an adapter.

ISTR Cliff mentioning something about buying special tooling for 5/8"-24 down in the reflex and that 1/2"-28 would be even more difficult.

 

[Cory_Shoot2Hunt]

ISTR Cliff mentioning something about buying special tooling for 5/8"-24 down in the reflex and that 1/2"-28 would be even more difficult.

I think that was part of it too now that you say it. Hasn’t been discussed in awhile but my memory is as long as my…. Well nevermind.

 

[MThuntr]

6mm ARC 20" Howa with 106 TAP. I'm comparing the OG6 to a Banish Backcountry. I feel they're comparable in sound suppression but with a different tone and the OG6 is significantly lighter. OG6 expressed ~25-30 fps lower velocity than the Backcountry.

Sadly my 6mm Creedmoor barrel is a Aero Precision Sendero profile and it is ever so slightly too big to fully spin it on.

 

[waspocrew]

My 6 CM barrel is a Bartlein carbon. Only logical decision was to buy a Tikka and spin on a 6 CM hybrid lite so I can use my OG6 on it

 

[Lionheart]

Well I’m felling kinda stupid lol. Had no idea about this group buy and bought off the website and paid full retail!
Would yall consider sending a consolation prize to the dummy lol?
Chris was very helpful and it’s already otw I think?
Edwin

 

[Huntnpack 2]

Sounds like a market need for a 6mm Optimized
OG-6L for guys with larger Barrels?

 

[PA_RidgeRunner]

If I hadn't have just received my Stealth Additive Works Orev PRS, I would likely have jumped on this group buy. Really curious to see what everyone's experience with these are, especially compared to a Dead Air Nomad, OCL Polonium, DDC Enticer, or CGS Sci-Six as those are what I have the most 6mm experience with. I'd like to put a dedicated hunting can on my 6 ARC by this fall.

 

[Cory_Shoot2Hunt]

If I hadn't have just received my Stealth Additive Works Orev PRS, I would likely have jumped on this group buy. Really curious to see what everyone's experience with these are, especially compared to a Dead Air Nomad, OCL Polonium, DDC Enticer, or CGS Sci-Six as those are what I have the most 6mm experience with. I'd like to put a dedicated hunting can on my 6 ARC by this fall.

I’m building 2 guns just for the Og6-s if that tells you anything lol very impressive, short and light and quiet.

 

[TeaRex]

Ug, havent seen this Group buy... is this closed/ended?

 

[Cbthomas]

I’m building 2 guns just for the Og6-s if that tells you anything lol very impressive, short and light and quiet.

What are you building? I have a 6 arc for my boys. Now I’m thinking i need a 6 creed or… 6um


Sent from my iPhone using Tapatalk

 

[Cory_Shoot2Hunt]

What are you building? I have a 6 arc for my boys. Now I’m thinking i need a 6 creed or… 6um


Sent from my iPhone using Tapatalk

Probably a 22cm and a 6UM. I have a 6cm now I chopped down to 16in and it’s just a little shorter than I’d like so kind of a turd lol

 

[Str8shtr]

I'd be curious to see the tooling used to thread the threads on these. I can't imagine trying to thread a half inch hole that far inside a hole.

 

[ID_Matt]

Got to shoot mine this weekend on an 18" 6 creed. I was comparing it to a 223 with a tbac ultra 7 and it was hard to tell enough difference to talk about. I know some are going shorter but it got me excited enough to order a 21" barrel to do a 22 creed on with the thought that I can add 3" of barrel and pick up some speed while still being as short as I am used to (18" barrel with 6" muzzle forward suppressor)

 

[B_Reynolds_AK]

Ug, havent seen this Group buy... is this closed/ended?

Closing it today. If you want in, send me a message.

I have a 6cm now I chopped down to 16in and it’s just a little shorter than I’d like so kind of a turd lol

Why do you say that? Shooting factory ammo?

 

[wyosam]

Picked mine up yesterday, quick range trip this morning. I was shooting it on my 16” 223 today, will eventually live on 18” dasher. I expected it to be good, but I am surprised just how good it is. For 3” forward, it is very impressive.


Sent from my iPhone using Tapatalk

 

[Cory_Shoot2Hunt]

Closing it today. If you want in, send me a message.


Why do you say that? Shooting factory ammo?

No I’m shooting 108’s and it’s super accurate but they’re only going 2700 and for the purpose this gun is as a jump out and shoot coyotes etc, I’d like something faster like a 22 creed.

 

[chutinlead]

I'd be curious to see the tooling used to thread the threads on these. I can't imagine trying to thread a half inch hole that far inside a hole.

probably a thread mill if I had to guess.

 

[B_Reynolds_AK]

No I’m shooting 108’s and it’s super accurate but they’re only going 2700 and for the purpose this gun is as a jump out and shoot coyotes etc, I’d like something faster like a 22 creed.

Copy that. A 22 CM with the 69. ELD-VT would be absolutely lethal, and fast, for coyotes.

 

[kswaterfowl]

No I’m shooting 108’s and it’s super accurate but they’re only going 2700 and for the purpose this gun is as a jump out and shoot coyotes etc, I’d like something faster like a 22 creed.

Get some 70 gr nosler ballistic tips and varget for that 6 creed. One of the best coyote killing bullets ever made. Should be able to get around 3300 fps with that 16" barrel.