NRL Factory Class Rifle Recommendations

[Paulyester]

I was waiting for the Seekins PH3 NRL, thinking it was going to be the latest and greatest and make my PH2 obsolete, but with the weight they come in, it really cuts into available accessories and still keeping the weight under 12lbs. What other rifles are you guys looking at? I'm considering the MgLite, but I've heard some accuracy issues with them, the Sig Cross is a good option but I wish it had a better trigger. Springfield Waypoint is up there as well, any others I'm missing?

 

[Megalodon]

PH2 NRL is the current end all be all in my opinion.

 

[wind gypsy]

Probably hard to beat the PH2 NRL in 6 creed.

The wby 307 alpine ST might be a nice option in 25 or 6.5 creed.

 

[Megalodon]

I take back my previous comment. The ph2 NRL is still going to be a contender, but and extra pound for factory class they announced today will open up some other options.

 

[khuber84]

Every weight class should get a 1# allowance for supressor use.

Tikka ctr or ph2 standard or nrl. I put an area 419 arca on my ph2, since it uses the existing action screw and front sling stud it technically applies. My ctr has a SRS hunter rail, front sling stud and utilizes a screw installed in the oem boss thats in front the froward action screw.

PH2 is still 1# lighter than the ctr.

 

[turbo406]

Every weight class should get a 1# allowance for supressor use.

Tikka ctr or ph2 standard or nrl. I put an area 419 arca on my ph2, since it uses the existing action screw and front sling stud it technically applies. My ctr has a SRS hunter rail, front sling stud and utilizes a screw installed in the oem boss thats in front the froward action screw.

PH2 is still 1# lighter than the ctr.

Is it the 20 or the 24 ctr? Whats the weight on it?

 

[khuber84]

Is it the 20 or the 24 ctr? Whats the weight on it?

24in, a few oz under 8# bare rifle.

 

[turbo406]

24in, a few oz under 8# bare rifle.

How about setup?

 

[khuber84]

How about setup?

Razor HD LHT 4.5-21 in NF rings, ckyepod double pull lightweight, SRS ti pro3 brake.

Was 4oz under 12#

 

[nm.otter]

Looking forward to seeing the T3x Ace in 6mm Creedmoor.