New Tundra owners — Tow hooks?

SDHNTR

WKR
Joined
Aug 30, 2012
Messages
7,104
What have you guys done for tow hooks/recovery points on your 3rd gen Tundras?

Such an embarrassing oversight by Toyota, but I know there are aftermarket options. I like the idea of the AFE’s because they are truly bolt on, but it looks like actually using them would rip the front bumper off. Are there any other true bolt on options?
 
Last edited:

WRO

WKR
Joined
Nov 6, 2013
Messages
3,399
Location
Idaho
e838f4639b7d9a92099715c2f9f83e12.jpg

Mine are built into my bumper


Sent from my iPhone using Tapatalk
 

ColeyG

WKR
Joined
Oct 25, 2017
Messages
378
Who makes that bumper? I really like the look and low profile.

Most of the aftermarket Tundra bumper are big and bulky and not very aesthetically pleasing.
 

pcrossett

Lil-Rokslider
Joined
May 9, 2022
Messages
112
Location
Colorado
I ended up purchasing these aFe front tow hooks. The angle that you would pull from is not ideal as they are under the truck which could affect the air dam, but my thought process was if I am in a position that I need to use them I am less worried about damaging the air dam and getting out of the situation.

Installation was pretty easy and straightforward.

 
OP
S

SDHNTR

WKR
Joined
Aug 30, 2012
Messages
7,104
I ended up purchasing these aFe front tow hooks. The angle that you would pull from is not ideal as they are under the truck which could affect the air dam, but my thought process was if I am in a position that I need to use them I am less worried about damaging the air dam and getting out of the situation.

Installation was pretty easy and straightforward.

Yes, but see original post.
 

tony

WKR
Joined
Nov 13, 2015
Messages
1,019
Location
WV
What year? Are the holes in place to mount hooks?
I have a '21 ranger and changed out the factory tow hooks.
I added this kit from rough country,(frame mount). I didn't see anything for a tundra though

I added these hooks

And just beacuse I have one of these for the hitch

MIght check with rough country or an aftermarket Toytota parts place and see if the kit is avalible.
 

WCB

WKR
Joined
Jun 12, 2019
Messages
3,640
I ended up purchasing these aFe front tow hooks. The angle that you would pull from is not ideal as they are under the truck which could affect the air dam, but my thought process was if I am in a position that I need to use them I am less worried about damaging the air dam and getting out of the situation.

Installation was pretty easy and straightforward.

Air dam...you mean the thing I instantly take off my bump upon purchasing a vehicle. They don't last through the first hunting season anyways.
 
OP
S

SDHNTR

WKR
Joined
Aug 30, 2012
Messages
7,104
Air dam...you mean the thing I instantly take off my bump upon purchasing a vehicle. They don't last through the first hunting season anyways.
Well on some trim level Tundras that thing is electric. It flips up and down automatically. So you’re gonna tear that stupid thing up and the actual bumper too. It’s insanely stupid.
 

Gadjet

Lil-Rokslider
Joined
Dec 16, 2018
Messages
299
They probably figure tow hooks aren't needed on the new Tundra. After all, how stuck could a guy possibly get with that baby little motor they put in them?
 
OP
S

SDHNTR

WKR
Joined
Aug 30, 2012
Messages
7,104
I put a set of Afe on the bottom of my frame. It was an hour job
Have you actually used them? They seem to be the easiest to install, but sure seems like the angle of the tow rope/strap would break the bumper.
 
Joined
Aug 21, 2018
Messages
364
Initially I put the above listed AFE loops on my frame, but they suck to access in the snow/mud and the strap angle puts pressure on the front bumper. I installed a covert bumper by CBI and have been very happy with it. Accepts a winch, has tow hook connections, has a solid bull bar and makes a great connection to the frame. I think it was just over 1k shipped.

I agree that it's ridiculous that it wasn't an included item, especially with the TRD package.

I believe the CBI covert bumper comes standard on the high end fancy version of the Tundra that's similar to the Raptors and such.

The covert bumper has a great stock appearance and extends a solid metal plate from mid grill line all the way down to the skid plate.
 
Top