New tricer bipod

The shroud for the adapter isn’t deep enough to fit over the sling stud for any of McMillan, Manners, or AG stock I have. I need to get some delrin washers and machine them down to extend the height. The other 2 options are install permanent pic rails or order the Rokstedi quick pic adapter.
Did you watch my how to video? You should be able to tighten that down a few turns before you install the pic plate and you will be good to go.
 
The shroud for the adapter isn’t deep enough to fit over the sling stud for any of McMillan, Manners, or AG stock I have. I need to get some delrin washers and machine them down to extend the height. The other 2 options are install permanent pic rails or order the Rokstedi quick pic adapter
Didn't fit my fierce firearms either, nor an after market stock i have on my tikka. I did watch the video and backed the stud out before tightening. Didn’t help. I like the bipod so will see if the Rokstedi adapter will work, thanks for mentioning that as i was unaware of it.
 
I got mine in today, I really like it. A touch lighter than my Atlas CAL and way way more capable if a bit slower.

I can live with the pan, but my only real problem right away is the tension lever is in the opposite spot from the KMW podlock. I understand why, to avoid the leg buttons, but it's going to be a training thing for me, and honestly just a bit trickier ergonomically. Worth it for the capability though.
 

Attachments

  • PXL_20250422_201344810.jpg
    PXL_20250422_201344810.jpg
    218.5 KB · Views: 108
  • PXL_20250422_201650486.jpg
    PXL_20250422_201650486.jpg
    236.9 KB · Views: 107
I got mine in today, I really like it. A touch lighter than my Atlas CAL and way way more capable if a bit slower.

I can live with the pan, but my only real problem right away is the tension lever is in the opposite spot from the KMW podlock. I understand why, to avoid the leg buttons, but it's going to be a training thing for me, and honestly just a bit trickier ergonomically. Worth it for the capability though.
Pull that little rascal out toward you and set it anywhere you desire....its adjustable.
 
The shroud for the adapter isn’t deep enough to fit over the sling stud for any of McMillan, Manners, or AG stock I have. I need to get some delrin washers and machine them down to extend the height. The other 2 options are install permanent pic rails or order the Rokstedi quick pic adapter.
In this picture stick something through the PA hole then spin it a turn or so until it is tight to the stock
 
The mustachioed gentleman is Drew, he owns Tricer and always speaks positively about his own products.

The generic looking guy is Matt Alwine, convicted poacher and really good wind-caller sponsored by and unofficial spokesman for MDT, RRS, and Leupold.

Ironically and serendipitously for Alwine, the owners and products who compete with the people who give him free stuff and money also happen to be the worst people and products on the planet, at least that’s what he keeps saying over and over again.
Sounds like the typical social media douche.
I have actually listened to the tricer owner a few times and he seems honest.
 
The mustachioed gentleman is Drew, he owns Tricer and always speaks positively about his own products.

The generic looking guy is Matt Alwine, convicted poacher and really good wind-caller sponsored by and unofficial spokesman for MDT, RRS, and Leupold.

Ironically and serendipitously for Alwine, the owners and products who compete with the people who give him free stuff and money also happen to be the worst people and products on the planet, at least that’s what he keeps saying over and over again.

Matt Alwine is one of the best shooters in the nation and a stone cold killer, he fully owns the mistakes of his youth.

That being said he’s a wealth of knowledge in the shooting world and I find his feud with tricer entertaining.
 
Matt Alwine... fully owns the mistakes of his youth.

Don't act like he got a trespassing ticket at 19. He got 8 convictions and that's after pleading down from the Lacey Act violations to avoid prison time.

The "mistakes of his youth" went on for at least 5 years straight, he poached at least 8 animals, and was escalating to more and more brazen crimes and actively profiting off of poaching until he was caught at 28 years old, for those unfamiliar.

If he's not talking about shooting steel targets he needs to keep his opinion to himself. I have zero respect for him as a person, only what he can do behind a rifle.
 
Did you watch my how to video? You should be able to tighten that down a few turns before you install the pic plate and you will be good to go.
I did. Any tighter on the sling stud will potentially crack the edge shell or, worse, crush the interior fill on the stock.
 
Don't act like he got a trespassing ticket at 19. He got 8 convictions and that's after pleading down from the Lacey Act violations to avoid prison time.

The "mistakes of his youth" went on for at least 5 years straight, he poached at least 8 animals, and was escalating to more and more brazen crimes and actively profiting off of poaching until he was caught at 28 years old, for those unfamiliar.

If he's not talking about shooting steel targets he needs to keep his opinion to himself. I have zero respect for him as a person, only what he can do behind a rifle.

Once again Matt owns it.

And having friends who've been victims of overzealous game cops, charges don't mean shit.
 
I don’t even know who the dude is but 9 years and 8 animals is not a mistake (assuming what was said previously is accurate).
It's not quite accurate

Edit: 8 animals, over 4 years. 5 counts of failing to obtain landowner permission, sounds like some of the animals were illegally harvested due to obtaining a resident license as a non-resident.

 
Received. First impressions are very good, despite sticky legs. Shooting today and will revert with data.

-J
 
It's not quite accurate

Edit: 8 animals, over 4 years. 5 counts of failing to obtain landowner permission, sounds like some of the animals were illegally harvested due to obtaining a resident license as a non-resident.


Sounds like a 1 illegal take and a bunch of tresspassing charges. Knowing enough officers, their dicks get hard at the thought of taking down anyone in the industry.
 
It's not quite accurate

Edit: 8 animals, over 4 years. 5 counts of failing to obtain landowner permission, sounds like some of the animals were illegally harvested due to obtaining a resident license as a non-resident.


It is accurate.

2010-2014 is 5 years. 2010, 2011, 2012, 2013, 2014.

5 counts of failure to obtain landowner permission

2 counts of illegal possession of a trophy animal

1 charge for fraudulently obtaining a resident license.

Guilty on 8 charges

8 poached animals seized just from Matt, and at least one more from his cronies who also caught poaching charges.

That's just what he pled to, and that's just Montana.

This is the guy who is constantly on social media dragging every company who doesn't pay him. The guy who talks poorly about people being dishonest in their marketing.

He objectively has no leg to stand on, he has forfeited his right to criticize anyone for how they act or treat people by choosing to be a literal criminal himself, and he needs to shut up and shoot steel until he has something nice to say.

He's free to start his redemption arc at any time, but step 1 is a heart change and stop being a turd, and he's obviously not ready for that yet.
 
Back
Top