New Titanium Dead Air OTB

[mlawrence125]

Nomad Ti OTB

deadairsilencers.com

Dead Air made their Nomad Ti an OTB option utilizing their Xeno mount

10.5oz 7.6" Overall Length, adds 4.6" to firearm, rated for 300 RUM/7BC at 16", and fits up to 1" diameter barrels

 

[AZ Gator]

Very interesting. I look forward to seeing some comparisons to see how it stacks up.

 

[dårlig jeger]

Very interesting. I look forward to seeing some comparisons to see how it stacks up.

I agree, will be interesting to see numbers.

 

[wind gypsy]

Cool. Fair to assume the 10.5 ounces doesn't include the 2 ounces from the xeno adapter? Woulda been cooler to be direct threaded so it doesn't add weight/length for no reason.

 

[dårlig jeger]

Cool. Fair to assume the 10.5 ounces doesn't include the 2 ounces from the xeno adapter? Woulda been cooler to be direct threaded so it doesn't add weight/length for no reason.

Maybe fair to assume? Not a ton different overall size from the nomad xc, but listed as .8 ounces heavier than the xc with xeno.

 

[JRay]

If it’s not 10.5oz with the adapter and has better suppression than the US OG, it’s not that interesting.

 

[wind gypsy]

If it’s not 10.5oz with the adapter and has better suppression than the US OG, it’s not that interesting.

It should have better suppression than the OG, if not it's a fail. It's larger diameter and more length barrel forward. A more apples to apples compare would be with OG-L that is of similar diameter and accommodates thicker barrels. Not sure it has a removeable front cap like all the other nomads and OG-L though? Would be a good candidate for a brake up front.

Also DA has much better distribution options than US. Most folks can buy a DA off the shelf somewhere without going through additional transfer costs/coordination.

 

[Q_Sertorius]

Nomad Ti OTB

deadairsilencers.com

Dead Air made their Nomad Ti an OTB option utilizing their Xeno mount

10.5oz 7.6" Overall Length, adds 4.6" to firearm, rated for 300 RUM/7BC at 16", and fits up to 1" diameter barrels

Curious to see how it compares in sound reduction, weight, length, etc. with different AB Raptor combinations.

 

[JDMBEND]

Great time to be a consumer in the suppressor market. So many good options becoming available. Capitalism at its finest.

 

[dårlig jeger]

These are the good old days of hunting firearm ownership! Things are cheap, we are getting what we want, technology is advancing like crazy.

I feel like 3d printed cans are like going from car phones to mobiles. It's going to go faster than we can keep up for a while.

 

[Tmcgarrigle]

And we are all going to be much poorer in the process of these advancements....

 

[mlawrence125]

Reading the description the xeno adapter is printed/machined directly into the suppressor. It's not an add on like the hub version.

Sent from my SM-S901U using Tapatalk

 

[wind gypsy]

Reading the description the xeno adapter is printed/machined directly into the suppressor. It's not an add on like the hub version.

I'm talking about the one that goes on the muzzle. Unless dudes start machining their barrels with xeno patterns, you're adding a muzzle device for that interface which adds weight and length. The xeno radial brake it appears these ship with weighs 2.7 ounces.

 

[yeti14]

Why make it more complicated....just make it a direct thread. Especially an otb

 

[Gtscotty]

Oh my, that's interesting, I already run Xeno on most things so this being plug and play is pretty cool. I'd be surprised if the suppression is much to write home about being 4.6" forward of the muzzle, but if it's good enough I might be a buyer.

 

[CMP70306]

Why make it more complicated....just make it a direct thread. Especially an otb

My guess is so that it acts as a sacrificial baffle to protect the titanium especially since it is rated for a 16” .300 RUM.

Not to mention that I believe browning will be putting a Xeno muzzle brake on several of their rifles it’s pretty much a win win for them.