Muzzle Brake

[Tbone58]

Has anyone looked into the Patriot valley arms breaks? Been thinking about picking one up.

 

[Inline6]

APA Gen 3 gets my vote, I have tried the 419 and really like it. The problem with the 419 I have experienced, the break turns and you have a shift in your zero. I have seen it happen enough at competitions that I no longer run them. YMMV

 

[CApighunter]

Has anyone looked into the Patriot valley arms breaks? Been thinking about picking one up.

I have two, an ultralight Jetblast and a backcountry brake. Jetblast is on a 270WSM and the backcountry is in a 300 win. Both are very effective at controlling recoil and aren’t extremely loud from behind the gun, off to the side is a different story.

 

[Tbone58]

I have two, an ultralight Jetblast and a backcountry brake. Jetblast is on a 270WSM and the backcountry is in a 300 win. Both are very effective at controlling recoil and aren’t extremely loud from behind the gun, off to the side is a different story.

Okay thank you. Those are the two I’ve been looking at and doing something similar to that. I have a 7mm rem mag and 300 win mag I want to do something different with. The factory breaks are decent at best.

 

[Landon4]

I have the 419 hellfire on several rifles and a 419 sidewinder on a 300 win mag they work great and are very easy to use with the self timing system. Thinking about getting the tbac mount from them for my 338 ultra

 

[NeverSummer]

Has anyone looked into the Patriot valley arms breaks? Been thinking about picking one up.

Refreshing this thread, the PVA Shockwave works phenomenally on a 300 win. They now may a lightweight version that is only 2.3 ounces. That would be my pick for the OPs Seekins 300 PRC. Not only does it reduce recoil by 50% it also directs the blast away from the shooter better than any other brake I've used.

 

[sportsmans challenge]

Surprised no one mentioned the TI PRO. Very lite weight and very effective as much as a terminator or better.

 

[NVhunter702]

I second the TI PRO

 

[deserteagle99uzi]

Insight Arms 4-Port Heathen is on my 6.5CM. They are sized for your rifle as well. It has performed well for me.

 

[Xbow hunter]

Just ordered a Tipro 3 today to go on a 22 inch Proof Sendero. Going to be waiting for the Terminus Zeus and Manners EH1 for a while before I get to try it out. Has anyone got a picture of a Manners stock in the Swamp Forged color that they could show a picture of? That’s what I went with and hope it looks as good as I think it will.

 

[MSmith1227]

Does anyone know what brake diameter best fits the Seekins Havak 300 PRC?

 

[Landon4]

I would imagine any 30 cal brake you want as long as you get the correct thread, probably 5/8-24

 

[MSmith1227]

I should have been more precise. I am looking for the best OD size on a brake to match the OD profile of the barrel.


Sent from my iPhone using Tapatalk

 

[Landon4]

Lol I though about that after the fact thinking maybe that’s what you meant, what’s the barrel diameter on that rifle

 

[MSmith1227]

That’s what I don’t know. I’m working away from home right now and can’t measure it.


Sent from my iPhone using Tapatalk

 

[Landon4]

Gotcha

 

[wind gypsy]

Lol I though about that after the fact thinking maybe that’s what you meant, what’s the barrel diameter on that rifle

PH1 barrels were 0.700" at shoulder for muzzle threads, I assume they've kept the same contour but not not positive.

I'm not much help on options for matching contour because I'd rather have a bigger diameter (more effective) brake that I can self time and not dick around with shims or a gunsmith turning it down. There's lots of options out there you could have turned down to match contour though.

 

[MSmith1227]

Thank you.


Sent from my iPhone using Tapatalk

 

[PineBrook413]

I've got a APA gen 3 little bastard on my 300prc. It's amazing how affective it is. I shoot 220 eld-x @ over 2800 fps and it recoils like a 308. with little to no muzzle jump.

 

[MSmith1227]

I’m really leaning towards a TI Pro 4, but I’m trying to figure out what size to get.


Sent from my iPhone using Tapatalk