Multipin or slider for elk

87TT

WKR
Joined
Mar 13, 2019
Messages
3,576
Location
Idaho
1 5 7 whatever works for you. Just should be a slider for long range practice and fine tuning. I just like the 5 pin as the "clutter" doesn't bother me and it helps me center faster. Just me but what ever works best for you.
 
Joined
Dec 16, 2014
Messages
593
I wondered about a 3pin slider with the middle pin as slider sighted at 50 with top at 20 and bottom at 60. Aim 12" low with the slider for ranges 25-45 if no time to move it and you still have 20 and 60 hardset pins for quick shots. All pins vertical like trophy ridge v5 sights. That way only a single post in the sight picture. Not sure how to move just the center pin and not the entire housing. Just a thought and not sure it's practical.
 

nphunter

WKR
Joined
Jul 27, 2016
Messages
2,002
Location
Oregon
5 pin slider for me, my buddy that comes up from PA to hunt with me has missed out on a couple of opportunities due to shooting a single pin. Elk just move too much and too quick IMO, I would rather have the extra pins there for when I need to make a quick adjustment than holding over and under for shots. I love shooting long-range also so I use my 60 and can shoot out past 120 which is fun and great practice. I had to make a follow-up shot on a bull this year and used the slider to adjust to the exact yardage and was able to connect on that shot. I most likely would have air-balled it without the slider trying to hold over him.
 

87TT

WKR
Joined
Mar 13, 2019
Messages
3,576
Location
Idaho
I shoot almost everyday unless it's snowing hard or raining hard. First 5 arrows are 100 yards then down to 60 and below.
 
Joined
Apr 4, 2019
Messages
622
Location
WI
After reading another roksliders comment i might toy with adding a bright drop of paint or what ever to my double pin to keep a clear bview but add in aiming references. Might be the best of both worlds for the guys worried about a cluttered view but want that quicker and accurate adjustment when animals run out a little farther after drawing
 

TX_Diver

WKR
Joined
May 27, 2019
Messages
2,617
I'm thinking of switching to the MBG Mountain Lite 3 pin this year (from a MBG ascent verdict).

I'll probably play with setting it up at 30, 40, 50 but with the indicators being for the top and bottom pin. Set it up so I can slide it up to 20 and use the top pin or slide down to who knows where and use the bottom pin. I doubt I'd ever need to slide it up to 20 but I'd have the option without having the extra pin.
 

prm

WKR
Joined
Mar 31, 2017
Messages
2,315
Location
No. VA
I'm using a 3-pin slider and really like it. I could see a 5-pin for Elk/Mule Deer. Probably never have to touch it, but the option is there. The three pin is a little less cluttered and retains the option for dialing long. Personal choice really.
 
Joined
Dec 31, 2017
Messages
91
Location
MI
I have used 1 pin for the last ten or more years. Once my bows got over 300 feet per second pin gap was a factor. Plus, my eyes started to get reading glasses bad, so pins turned into a big mass of blur. Now I have gone to a verifier peep and cleaned up the blur. I bought a 3 pin head for my HHA slider and I am going to try that this year.
 

wakechase

FNG
Joined
Oct 28, 2017
Messages
45
Location
Colorado
If an animal comes in to 25 yards, winds you, jumps up the hill 20 yards and turns back to take a look, that shot just became a 45 yard shot. Now you’ve got to make some quick judgement on how much higher to hold your single pin, rather than relying on the 40 or 50 pin which are tuned and readily available at full draw.


This is exactly my opinion
 

smbolan

FNG
Joined
Dec 31, 2018
Messages
52
I have hunted with a 1-pin for years now. Tried to go back to multi pins, can’t do it. I haven’t been burned cause of it yet. The day May come. Til then though, it’s the single slider for me


Sent from my iPhone using Tapatalk
 
Joined
Aug 23, 2014
Messages
5,478
Location
oregon coast
I have been all over the board over the years. right now, on my compound, I have a 3 pin mbg slider, and it's the most practical configuration I have personally shot.

I have my 3 hunting pins (20-40) and the ability to shoot 80yds for practice (heavy arrows give me clearance to 80, which is fine with me)

I have got by fine over the years with 4&5 pin fixed, but I do like having the ability to shoot further for fun or a follow up shot. 3 pin slider is intuitive for me.

the option sight looks to be best case scenario, but I don't know I will ditch my black gold to get one. I like what I have now enough
 

joshjt25

FNG
Joined
Jun 21, 2017
Messages
16
I like a mbg ascent 4 pin slider for 20 to 50 yards. The bottom pin is a smaller diameter (.010). I rarely shoot over 50 yards when hunting but like the ability to practice out to 100 yards. Makes those 50 to 60 yard shots seem easy. I have always been afraid I'll forget to adjust a single pin or wont have time.

Sent from my LM-G710VM using Tapatalk
 
Top