Middle of rifle season your rifle spends all day in snow then rain

Joined
Jan 23, 2022
Messages
70
I read on the internet about using brake cleaner and it did remove some of the finish on a plastic stock. I now use gun cleaner spray which contains no lubricants. I add lubricant later as needed.
 

Wrench

WKR
Joined
Aug 23, 2018
Messages
6,248
Location
WA
It has its place. In Louisiana where our rifles are always wet but rarely below freezing, it's wonderful stuff. Great for the saltwater exposure.
If you open a trigger that's had wd sprayed in it for a few years, you'll know exactly how triggers fail.

The best gun oil I've ever used is R&O turbine oil. If it's good enough to keep a perpetually wet, multi billion dollar hydroelectric unit spinning....it's plenty for our sloppy rifles.

You can find it at your oil suppliers under R&O (rust and oxidation) turbine oil.

It never gets gummy or thick and supercedes anything you'll find at any gun, hardware or auto store.
 

Wolfshead

Lil-Rokslider
Joined
Aug 10, 2022
Messages
168
If you can use compressed air to get as much water out and then a hair dryer.
It’s what I do and I’ve never had a problem
Check the assembly after the season is over.
 
Top