Micro Stabilizer Setup Opinions

[nkgillil]

What stabilizer setup is everyone running? Ive been looking at getting a 12/10" or a 10/8" micro diameter setup... want to hear opinions between some. Was looking at Cutters, Wickstick, Shrewd Vantage, Taps, conquest, cbe torx, beestinger microhex?

 

[arlenmyles]

I really like my cutters. I have a 12 & 10 with the cordillera bracket.

 

[WMag338]

I'm using a 10" & 6". For me, the 6" back bar is a great size since it doesn't stick too far off the bottom to be annoying. Balances well.

I've recently started using Antler Ridge stabilizers based on all the good reviews. They are legit. Zero vibration. Zero noise. Pricey.

 

[Billy Goat]

On a short bar you won't notice a difference, it's not long enough to flex. You want light and stiff for a stabilizer, thin if shooting in the wind. At 10" they had better all be stiff.

I generally like Shrewd stuff, however their vantage bars have a dampner between the rod and the weight stack, and they include that dampner in the length. If going Shrewd look at the S2 or the RevX instead of the Vantage.

I think at the lengths you are looking, you won't find much difference in any of the brands. I'd get whatever you can find for the best price, could add Dead Center to the list you are looking at as well.

 

[big44a4]

The conquest hunter kit is/was the best value given when I got mine. I also use conquest stabilizers for everything and have been for several years now without issue.

 

[nkgillil]

yea i was thinking with the 10 up front due to once u add a QD u are over 11 for sure... although mostly hunt out of treestand, never know when might have to shoot out of a blind too. Ive shot some shrewd and cbes... but never shot any cutters or conquest. Buddy has antler ridge setup and its $$$.

 

[nkgillil]

Anyone had any experience with a HHA tetra setup? Found a good deal on a set of those

 

[Planopurist]

I’m running CBE Torx Micros. The mounts are amazing. I recently ordered Elite versions of the micro stabs, still in shipment.

I was running Bee Stinger Microhex and standards.


@StraightWayOutdoors
Straight Way Outdoors, Fulcrum Archery, Elite Archery, CBE, Slick Trick, Upwind Odor Elimination, Wicked Twisted Bowstrings, Pine Ridge Archery, Sevr, Bloodline Fibers, Element Archery, Spypoint

 

[wildbill34]

I'm with Billy Goat, brand doesn't matter much at shorter lengths. Look for price, small diameter.

I've been happy with Wickstick.

 

[nkgillil]

I’m running CBE Torx Micros. The mounts are amazing. I recently ordered Elite versions of the micro stabs, still in shipment.

I was running Bee Stinger Microhex and standards.


@StraightWayOutdoors
Straight Way Outdoors, Fulcrum Archery, Elite Archery, CBE, Slick Trick, Upwind Odor Elimination, Wicked Twisted Bowstrings, Pine Ridge Archery, Sevr, Bloodline Fibers, Element Archery, Spypoint

i have the cbe hunting torx on my mathews... i guess the micros are smaller tho? whats opinon on the microhex vs the CBE torx micros?

 

[nkgillil]

Any of yall plan on selling any in the near future? @wildbill34 @arlenmyles @WMag338 @Billy Goat @big44a4 @Planopurist

 

[Billy Goat]

Any of yall plan on selling any in the near future? @wildbill34 @arlenmyles @WMag338 @Billy Goat @big44a4 @Planopurist

No.

Generally you don't find too many for sale I feel like. They aren't a glamorous part of archery, once you get some you just keep using them.

I do see the Bee Stinger 10.8 pop up a fair amount in the classifieds.

 

[Planopurist]

i have the cbe hunting torx on my mathews... i guess the micros are smaller tho? whats opinon on the microhex vs the CBE torx micros?

All things considered, they’re about a push. CBEs are priced a bit better. Bee Stingers are slightly smaller diameter (.5” vs .6”) and have thinner weights on the end. This is a fairly marginal difference. I also have a 15”/12” set of Torx Spyders on a bow also.


@StraightWayOutdoors
Straight Way Outdoors, Fulcrum Archery, Elite Archery, CBE, Slick Trick, Upwind Odor Elimination, Wicked Twisted Bowstrings, Pine Ridge Archery, Sevr, Bloodline Fibers, Element Archery, Spypoint

 

[sodaksooner]

Titanium Archery Products are a decent deal pricewise. Pretty stiff. I went to a 15" front, 12" back from the BeeStinger 10/8 combo (Still in use on my other bow) I have been very happy with the setup. No bling and pretty effective. The weights are smaller diameter than the Bee Stinger weights also.

 

[fatlander]

Sunya archery on Amazon.

Buy yourself a couple more tags this fall instead of an over priced piece of carbon and hunk of metal.




Sent from my iPhone using Tapatalk

 

[dtrkyman]

I have a wickstick micro 15, nice bar for the money. No side bar I just use weigths on the left side of the riser to off set sight and rest weight and balance the bow out.

 

[TheTone]

I’ve been using a 10 inch micro hex on two bows now, been happy with it but part of me would like to tinker with adding a side bar and/or going trying a 12-15 inch front bar or even a quivilizer. I do like the small diameter

 

[nkgillil]

thanks for replies fellas

 

[Eastonsgrandpa]

I run a 15 and 10 Cutter on all three of my bows. They are fantastic.

 

[nkgillil]

looks like alot of ppl running cutters... Those TAP DOA titaniums look awesome too