Maven B.5 18x56 with reticle

texag10

WKR
Joined
Jul 15, 2015
Messages
416
Has anyone used these? I have a set with a mil reticle on the way via the maven demo program. I'm hoping they will bridge the all day glassing comfort of a big bino with the quick correction ability of a spotter with a reticle.

They will be a tripod mounted companion to my to Leica 10x42 geovid 3200s.
 
Last edited:
OP
T

texag10

WKR
Joined
Jul 15, 2015
Messages
416
I went out to a local open space/preserve area this morning to test out the binos. I brought along my Leica 10x42s to compare. Both were used off a Sirui TO24sk tripod with a VA5 head.

Caveat: I do not have time looking through a lot of glass, and the only 15x + binos I've looked through was a friend's low level vortex 15s handheld. I do have a lot of time with Meopta 10x42s and my current Leicas.

I set up the diopter for the B5s yesterday, and noticed the focus was very sensitive and it didn't seem like they had good depth of field, but this was at close range in my neighborhood.

Out in more realistic conditions this morning there were no issues with depth of field. They weren't as forgiving as my Leicas under 1000yds, but I do not know if this is a higher mag bino trait or unique to the B5.

I appreciated being able to have the 18s on a tripod and use my 10s to look at things closer. When viewing at distance there simply is not a contest, the 18s are awesome! I found a herd of cow elk with the 18s, switched to the 10s on the tripod, and simply could not make them out. This was about 5 minutes before the sun actually broke the horizon. When I came home I used OnX to measure the distance: 2.8 miles.

I mostly like the reticle design. It's a floating center dot with hash marks at .2mil. There is a larger hash mark at every 1mil interval, and from 4 to 5 mil they have .1mil hash marks. The scale extends to 20mil left, right, and down. Where I think there might be an issue from a shooting perspective is there is nothing above the center point. I could see this being a problem for a spotter who has these locked in on a target and the shooter misses high. You don't have an easy, exact reference unless you move the center point or infer the distance they were off using the lower portion of the reticle. I think this is a small price to pay for how unobtrusive the reticle appears while glassing.

The plan was to get out to a range that has targets to 600yds this weekend. It would've been a great test of using these binos to aid in truing velocity, zeroing, and as a shooter spotter system where everyone is using mils and FFP scopes with mil reticles, but rain looks like it may interfere.
 
OP
T

texag10

WKR
Joined
Jul 15, 2015
Messages
416
Quick update after a range day: Spotting 6.5mm holes in paper at 200 yds, no problem. Seeing hits on steel at 400-600yds, no problem. We used the binos to zero new loads and confirm velocity by measuring drops out to 600. The efficiency they bring to shooting trips is awesome.

The concern about no has marks above the center aiming point was unfounded in practice. Even for a target where hits weren't so easily visible, you could just hold on the 1 mil has vertically. Very happy with these and can't wait to get out hunting with them.
 
Joined
Mar 6, 2013
Messages
3,272
Can you see the reticle with one eye? Thinking if I need to video a shot with my phone if it will see the reticle like it would on a reticle spotter.
 
Top