Matthews ARC Axcel Landslide windage

[Hunterdeer]

I have a Matthews ARC and am installing the Axcel Landslyde bridge lock sight. The sight mounts okay but the issue I am having is I am at the end of the windage adjustment... I tried the offset they have available, but when I mount it, I can no longer see the sight tape so that really is not a solution. Has anyone experienced this that can provide me with some advice please?

 

[Billy Goat]

Are you meaning see the sight tape at full draw?

I haven't used a Landslyde, but have used a few offset brackets, and offset bars without issues in the bridgelock mount with Achieve sights. Not too much difference.

 

[Hunterdeer]

Are you meaning see the sight tape at full draw?

I haven't used a Landslyde, but have used a few offset brackets, and offset bars without issues in the bridgelock mount with Achieve sights. Not too much difference.

Thanks Billy Goat. When i use the bridgelock in the ARC riser as meant to be the windage adjust goes maximum. I researched and learned there is the offset bracket which I purchased but when the offset is installed it seriously hinders the visibility to the tape. Axcel does include a side mount bracket that will accept the bridgelock but that really negates the ARC bridgelock feature... it is same as having a general side mount scope.
I am going to end up using the side mount for the bridgelock. Can't help feeling duped by Axcel and will absolutely not buy another product from them.

 

[Billy Goat]

Thanks Billy Goat. When i use the bridgelock in the ARC riser as meant to be the windage adjust goes maximum. I researched and learned there is the offset bracket which I purchased but when the offset is installed it seriously hinders the visibility to the tape. Axcel does include a side mount bracket that will accept the bridgelock but that really negates the ARC bridgelock feature... it is same as having a general side mount scope.
I am going to end up using the side mount for the bridgelock. Can't help feeling duped by Axcel and will absolutely not buy another product from them.

Im not exactly following why the visibility is limited? Is it because the angle of the scale is faced into the riser?

Got any pics? Im just wondering if its something you are overlooking, like too close to the problem, I do that stuff all the time.

 

[Hunterdeer]

Im not exactly following why the visibility is limited? Is it because the angle of the scale is faced into the riser?

Got any pics? Im just wondering if its something you are overlooking, like too close to the problem, I do that stuff all the time.

I do not have any pics and no longer have the offset I returned it.

With the bridgelock protruding out -normally everything is fine visually... when i add the offset it shifts the sight to the right from the bridgelock basically putting the sight tape partially behind the bridgelock shaft. I appreciate your time and expertise.